HPI Racing 1/5 Baja 5B SS Buggy Kit w/Clear Body

Tower Stock# LXTCV2  •  Manufacturer Stock# 10610
HPI Racing 1/5 Baja 5B SS Buggy Kit w/Clear Body (large view)
Notes from our tech department:
This is the 1/5 scale, gasoline powered, radio controlled,
HPI Baja 5B SS Buggy kit.


Chassis: Narrow channel monocoque design 0.16" (4mm) thick, gun-metal
gray in color, constructed of aircraft grade 6061 T6 aluminum,
side guards protect engine from dirt and debris
Drive: Rear wheel gear drive with heavy duty dogbones
Engine: Fuelie 26S gas engine (HPIG5403) with pull starter,
quick release foam air filter, primer, choke and kill switch
Steering servo: SFL-11MG Servo, metal gear/24.7kg-cm6.0Vg (HPIM2772)
Throttle servo: SF-50 Metal Gear Servo (HPIM2777)
Ball Bearings: Full set included
Shocks: Four VVC heavy duty aluminum shocks with 5 externally
adjustable dampening settings and dual rate springs for
progressive dampening action on all surfaces, modified rear shock
tower brace
Main Gear: 57 tooth composite construction
Gearbox: Sealed, heavy duty metal gears
Differential: Viscous Torque Control can be tuned using different
weight diff oils, hardened metal planetary gears, aluminum alloy
diff case
Brakes: Ventilated dual disc
Clutch: 2-shoe, 8000 RPM
Gas Tank: 25.3 oz (750cc)
Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4" (60mm) wide
6.7" (170mm) outer diameter
Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1" (80mm)
wide, 6.7" (170mm) outer diameter
Wheels: Black 5-spoke, nylon 3-piece bead lock, bead is bolted to
wheel to hold tire securely in place-no need for tire glue
Body: Clear pre-cut
Rear Wing: Molded black plastic with decals applied
Roll Cage: Baja style high impact nylon protects engine and body
from crash damage
Suspension: Fully adjustable, long travel double wishbone
Caster: Adjustable, with shims 22 / 25.5* stock / 29 degrees
caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited, valid only in USA, Canada and South America
Baja light sets are available - HPIC0336 (white) HPIC0337 (blue)


HPI Baja 5B SS kit, engine, steering servo, 2oz (60cc) shock oil,
1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease
body, with wing, extra air filter, wrenches, decal sheet and
illustrated instruction manual, 3.4oz (100cc) Z191 2-cycle oil


Radio: 2-3 ch FM or 2.4GHz with standard size servo for throttle
(do not use AM radio)
Receiver Battery: 6V hump configuration, at least 3000mAh
Battery Charger: Timed or paek for receiver pack
Unleaded Gasoline: 87-93 octane, mix gasoline and two cycle oil
at 25:1 ratio,
Transmitter Batteries: 8 AA
Paint: Spray or brush-on for polycarbonate bodies
Building and track equipment


Length: 32.2" (817mm)
Front Width: 18.1" (460mm)
Rear Width: 18.9" (480mm)
Height: 10" (255mm) with 1G, 11" (280mm) with 0G
Ride Height: 3" (76mm)
Suspension Travel: Front 3.7" (95mm), Rear 3.9" (100mm)
Weight: 21.3 lbs (9.6kg) without fuel
Wheelbase: 22.4" (570mm) wheels on-center front-to-rear
_ Front Track: 15.5" (395mm)
Rear Track: 15.7" (400mm) outer edges of wheels
Gear Ratio: 8.382:1
Tires- Front: 2.4" (60mm) x 6.7" (170mm)
Rear: 3.1" (80mm) x 6.7" (170mm)
Length: 22.9" (581mm)
Width: 8.8" (224mm) at rear wheels (widest point)
3.25" (82mm) ahead of front wheels (thinnest point)
Height: 4.75" (121mm) at highest point


For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 12x24mm Fr Wheel Hubs 2 HPIC0089
4 12x24mm R Wheel Hubs 2 HPIC0089
2 10x15mm Steering Shafts 1 DTXC1595
2 17x30mm Idler Gear 1 HPIC0092
2 12x24mm Drive Gear 1 HPIC0089
1 12x24mm Spur Gear Mount 1 HPIC0089
2 10x15mm Diff 1 DTXC1595

jxs 09/13/07

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info