Midwest Cellfoam 11-1/2"x11-1/2" 3mm (4)

Tower Stock# LXNLY6  •  Manufacturer Stock# 5920
Midwest Cellfoam 11-1/2
Notes from our tech department:
This is a four pack of 3mm Midwest Cellfoam 88 Sheets.


Coated ceramic calibration die faces produce tough ding
resistant outer skin
Cuts with hobby knives, razor blades and hot wire machines
Can be painted with water based, enamel, latex and silk flower paints
Accepts permanent markers, stickers and vinyl transfers
Accepts epoxy, water based contact cement, wood glue, craft glue,
polyurethane wood glue, hot melt glue, spray contact cement
and foam safe CA glue
Sandable edges and surface
Easily cut to shape to represent simple land elevation and landscape
scenery for architectural designers and model landscape builders
_ Can also be used to create building structures
Will not absorb water and is acid free


Four 3mm thick foam sheets


Length: 11.1/2" (292mm)
Width: 11-1/2" (292mm)
Thicknesses: 0.12" (3mm)


If using CA glue it MUST be the foam-safe type. Regular CA glue will
destroy the foam.

ajw 10/09/06

Manufacturer Mailing Address
Additional Manufacturer Contact Info