Team Losi Racing 22X-4 Race Kit: 1/10 4WD Buggy

Tower Stock# LXLZRW  •  Manufacturer Stock# TLR03020
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments ($166.67, $166.66, $166.66) Details
Notes from our tech department:


Chassis: 7075-T6 0.098 (2.5mm) thick aluminum milled plate with
carbon fiber front and rear braces
Drive: Four wheel shaft
Differentials: Large volume bevel gear diffs with all-metal internals
and ring gear, optional composite internals and ring and pinion
gears available separately, carbon fiber center diff mount
Suspension: Lower A-Arm, upper adjustable link,
Adjustable front and rear axle height, rear axle pin
position, inner front and rear hinge position, nearly unlimited
rear camber link positions, and more
Shocks: G3 12mm Big Bore oil-filled, pistons now secured by screws,
new caps and bodies increase spring collar height by 3mm to
accomodate lower ride heights, new eyelets allow switching
between normal and +3mm real axle height without needing to change
stroke or up-travel
Shock Towers: Carbon fiber
Ball Bearings: Full set, rubber sealed
Body: Clear 22-X4 lightweight 0.047 (1.2mm) thick polycarbonate,
TLR 6.5 (165mm) wide rear wing
Steering: Carbon fiber front steering mount
Battery Mount: Elastomer band allows different height batteries to be
Servo Mount: Floating design secures to chassis plate near the
centerline then uses rigid carbon fiber to support weight and
leverage of servo to keep mount from affecting chassis flex
Wheels: Fluorescent yellow dish type with 12mm hex, 2.2 (56mm)
diameter, deeper offset front wheels for improved hex engagement


TLR 22X-4 110 scale, Electric Powered 4WD Buggy Kit with Lightweight
Body, Rear Wing, Wheels, Decals, and Instruction Manual


Radio System: 2-channel with high-torque steering servo
Motor: Brushless for 4WD buggies
Electronic Speed Control: Compatible with selected motor
LiPo Battery: 7.4 - 7.6V 2S Shorty configuration
Charger: Compatible with selected battery
Tires: 2.2 4WD buggy compatible
Paint, tools and track equipment


Length: 14 (356mm)
Width: 9.8 (250mm)
Height: 5.8 (148mm)
Wheelbase: 11.2 (283.5mm)
Front and Rear Track: 9.8 (250mm) distance to outer edges of tires
measured side-to-side
Internal Gear Ratio: 2.5:1
Approximate Assembly Time: 3-5 hours
Experience Level: Advanced