Team Losi Racing 1/8 8IGHT-X Nitro Buggy Elite Race Kit

Tower Stock# TLRC2284  •  Manufacturer Stock# TLR04010
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments ($216.67, $216.66, $216.66) Details
Notes from our tech department:
**Now includes the option parts used by elite level race teams.**

Carbon Center Diff Brace
Carbon Fiber Arm Inserts
3.5mm Shock Shafts
New Pistons
Aluminum Front Brace
Front Universals
Polycarbonate Wing
10mm Wing Riser
Quick Change Engine Mount
Wider Hexes
Updated Rear CVA Axle


Chassis: 7075 T-6 aluminum 0.12 (3mm) thick wide style that
increases stability, and allows components to be spread out for
easier maintenance, redesigned side guards
Drive: Four wheel shaft drive with front universals, and rear CVAs
with updated axle and shaft for more rear grip and better tracking
under bumpy conditions
Differentials: Gear type, sealed viscous filled, redesigned for
easier access
Engine Mount: Larger in size to reduce chassis flex
Shocks: Oil-filled aluminum body, aluminum caps with threaded bleeder
screws, 4mm diameter shafts
Shock Towers: 7075 aluminum construction with updated camber link
and shock location holes for more tuning options
Suspension: Improved geometry with updates such as aluminum spindles,
17.5 degree spindle carriers, longer front shocks, wider front
pivot with less scrub radius, narrower rear pivot, longer rear
shocks, and updated hub offset, suspension arms designed to accept
stiffener plates which allow tuning of suspension arm flex
Front and Rear Swaybars: Collars used eliminate side-to-side play
Steering: Redesigned for less cluttered linkage and more ackerman
adjustments, improved servo saver eliminates bellcrank bind
during high loads
Ball Bearing Actuators: Revised throttle actuator uses bearings to
improve throttle and brake response, new brace prevents flexing
during heavy braking
Body: Clear polycarbonate, cab forward design to improve steering,
IFMAR wing and standard polycarbonate wing with 10mm riser
Fuel Tank: 4.2oz (125cc)
Wheels: Dish type yellow in color, 3.3 (83.5mm) diameter, 1.7
(42mm) wide, 17mm hex
Brake: Semi-metallic pad with steel disc
Radio Tray: Carbon construction, updated to relocate throttle servo
near the engine to eliminate additional linkage
Caster: Adjustable, castertoe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis, 17.5 caster blocks with adjustable spindle height,
optional spindle Ackerman arms sold separately for fine tuning
Camber: Adjustable front and rear, camber refers to the angle of
the tops of the tires from vertical when viewed from front or
behind vehicle
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the Product) will be free
from defects in materials and workmanship for a period of 2 years.


TLR 18 scale Glow Powered 8ight-X Elite Race Buggy Kit
with 13T Pinion Gear, Clear Body, Shocks, Wheels, Fuel Tank
and User Manual


Radio: At least 2-channel with high torque steering servo
Engine: .21-.31 cu in (3.4-5.1 cc) short course type with exhaust
Receiver Battery: 7.4V LiPo, at least 2000mAh recommended
Paint: Polycarbonate safe spray or brush on paint
Glow Fuel: 10-30 nitro content
Glow Starter, Fuel Bottle, Tools and Track Equipment


Length: 19.4 (494mm)
Width: 12.1 (308mm)
Height: 7.1 (180mm)
Wheelbase: 12.8 - 13 (326 - 329mm)
Ground Clearance: 2.4 (60mm)
Internal Gear Ratio: 3.23:1
Final Drive Ratio: 11.9:1
F & R Track: 12.1 (307mm) distance between outer edges of wheels
measured side-to-side
Gear Pitch: 1.0 Module


For Replacement Ball Bearings use:
Qty. Size Location
2 8x14mm flanged Rear Diff Order numbers for
2 8x14mm flanged Center Diff ball bearings can be
2 8x14mm flanged Front Diff found in the Optional
1 5x11mm Fr Gearbox Parts and Accessories
1 5x13mm Fr Gearbox Section.
4 8x16mm Front Spindles
4 8x16mm Rear Spindles
1 5x11mm F Diff Pinion Gear
1 5x13mm R Diff Pinion Gear
4 8x16mm Rear Hubs
2 332x316 Throttle Brake Lever
1 5x10mm Clutch Bell
1 5x13mm Clutch Bell

jxs 011320



Product Documents & Files

Manufacturer Contact Information