Associated 1/10 B6.1DL Team Kit Limited Edition

Tower Stock# LXLMWZ  •  Manufacturer Stock# ASC90021L
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments ($100.01, $99.99, $99.99) Details
Notes from our tech department:


Chassis: 7075 aluminum, 0.12" (3mm) thick
Drive: Rear wheel with heavy duty V2 rear axles with 67mm bones,
laser etching on front axles, lightweight aluminum top shaft
Differential: Ball type, adjustable height
Transmission: 3-gear Laydown Stealth for lower and forward center of
Slipper Clutch: New slipper assembly for better balance and shock
Shocks: Machined pistons for smoother operation, V2 springs
Shock Towers: Heavy duty V2 routed graphite
Steering: Gull wing shaped suspension arms and +1 Ackermann plates
for a sharp feel and more control, Ackermann refers to the effect
of the inner front wheel turning faster than the outer front wheel
during turns
Body: JConcepts B6 lightweight clear body and wing
Ball Bearings: Factory Team upgraded bearing kit
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis, aluminum C and D arm mounts for anti-squat and toe
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle,
easy insert system adjusts camber link position and rear axle


1/10 scale Team Associated RC10B6.1DL Team Buggy Kit with Clear Body
and Wing, Shocks, Ball Bearings, Lay Down Stealth Transmission
and Instruction Manual


Radio: 2-channel with high-torque steering servo
Motor: 540 size
ESC: To match selected motor
Tires and Wheels: 1/10 scale buggy
Battery: 7.4 - 7.6V LiPo, 6.0V LiFe with "shorty" battery dimensions
Battery Charger: To match selected battery
Pinion Gear: 48 pitch
Polycarbonate safe spray or brush-on paint
Building and track equipment, charging bag if using LiPo batteries


Final length, width and weight will vary based on electronics, tire
configuration, wing position and vehicle setup
Wheelbase: 10.9 - 11" (277 - 279mm)


For Replacement Ball Bearings use:
Qty. Size Location Order Qty.
4 3x7x3mm Steering 2 Stock numbers for
4 5x10x4mm Steering Blocks 2 bearings can be found
4 5x10x4mm Gearbox 2 in the "Optional Parts
2 10x15x4mm Differential 1 & Accessories" section
2 10x15x4mm Rear Uprights 1
2 6x13x5mm Rear Uprights 1

jxs 04/07/19



Manufacturer Contact Information