Team Losi Racing 1/10 22 5.0 DC Elite 2WD Dirt Race Kit

Tower Stock# LXLMHM  •  Manufacturer Stock# TLR03022
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments of $123.33 Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:

FEATURES

Chassis: 7075-T6 aluminum milled plate 0.8" (2mm) thick, carbon
fiber electronics mounting plate
Drive: Two-wheel
Differential: Ball type with adjustable height
Transmission: 3-gear laydown with all new slipper plates
Slipper Clutch: All new slipper plates, pads, spring and top shaft
design
Shocks: Oil-filled 12mm Big Bore
Shock Towers: Carbon fiber 0.8" (2mm) thick
Suspension: Titanium turnbuckles, stiffezel front arms, front roll
center adjustment, rear suspension features roll center, track
width, anti-squat and toe adjustment. all new rear hubs and inner
rear pivots
Steering: Longer bell cranks and steering arms, and changes to
Ackermann angle for smoother feel at off center and high speed,
and higher speed steering for tighter tracks
Body: Cab forward precut 0.03" (0.7mm) thick, with front and rear
wings
Ball Bearings: Full set, rubber sealed
Caster: Adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Adjustable, camber refers to the angle of the
tops of the tires from vertical when when viewed from front or
behind vehicle
Front Roll Center: Includes standard Low Roll Center (LRC), and
High Roll Center (HRC) front pivots and kick shim with incremental
adjustments

INCLUDES

1/10 scale TLR 22 5.0 DC ELITE Race Buggy Kit with
Clear Body
32.5 Weight Shock oil
4 Yellow Wheels
82T 48Pitch Spur Gear
User Manual

REQUIREMENTS

Motor:
ESC:
Radio:
Wheels:
Tires:
Pinion Gear:

SPECIFICATIONS

Length: 15" (382mm)
Width: 9.8" (250mm)
Height: 5.8" (140mm)
Wheelbase: 11" (280mm)
Track: Front and Rear 9.8" (249mm), disance from outer edges of tires
measured side-to-side
Diff Height: 0mm, +1.75mm, +2.5mm, +3.5mm adjustable
Spur Gear: 72T and 78T 48 pitch

COMMENTS

For replacement or to upgrade to Ball Bearings use:
Qty. Size Location
4 5x10x4mm Fr Spindles Stock number for ball bearings
4 5x8x2.5mm Steering are located in the Optional
4 5x13mm Rear Hubs Parts and Accessories section
2 10x15mm Diff
2 5x10x4mm Idler Gear
2 5x10x4mm Layshaft
2 5x8x2.5mm Diff Gear

jxs 07/23/19

Resources

References

Manufacturer Contact Information