Axial 1/10 SCX10 II UMG10 4WD Kit

Tower Stock# AXIC1206  •  Manufacturer Stock# AXI90075
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments ($100.01, $99.99, $99.99) Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:


Chassis: Scale steel C-channel side rails with adjustable body mount
adjustable CMS (Chassis Mounted Servo) system (servo not
Drive: Four wheel with WB8 HD Wild Boar driveshafts with center
splined slider to reduce flex and fatigue, three-piece driveshaft
with strengthened slider-floater tube, AR44 single universal joint
steel axles for up to 45 steering angle
Transmission: New scale appearance-sits lower in the chassis for
greater efficiency, two-speed gear set for a servo activated
lowhigh range (servo not included)
Slipper Clutch: Uses pad on each side of spur gear for added surface
area and precise tuning and holding power, 32 pitch gearing for
high torque applications
Body: Molded polycarbonate, requires painting and trimming, military
based cab forward design, front end configuration enables vehicle
to take on steep inclines, eight LED light mounting locations,
four in front grille, two in front bumper and two in rear frame
plate (LED lights not included, sold separately) Rear Cage Hinge
System allows easy chassis access by removing two body clips under
the cab
Shocks: Oil-filled, aluminum body, white springs
Suspension: Optimized suspension geometry with integrated mounts
upper and lower aluminum links, 4-link design reduces axle steer
and torque twist, and guards against suspension wrap-up in high-
power applications, all metal links
Steering: Universal joint axles allow up to 45 of steering
Tires: MT45 big block symmetrical pattern, R35 (sticky) firmness
compound, foam inserts, functional spare tire
Wheels: MW19 three-piece black plastic beadlock, 12mm hex


Axial 110 scale electric powered 4WD SCX10 II UMG10 Crawler with
Body, Interior Details, Decals, Wheels, Tires with functional
Spare, waterproof Receiver Box and Instruction Manual


Radio: 2-channel with high-torque steering servo
Motor: 540 size
Electronic Speed Control: To match selected battery
Battery: 7.4V 2S LiPo or 7.2V NiMH stick pack
Battery Charger: To match selected battery
LiPo charging bag (if using LiPo battery) paint, building and track


Length: 17.9 (455mm)
Width: 9.1 (230mm)
Height: 9.6 (245mm)
Wheelbase: 11.4 (288mm)
Track: 9.1 (230mm) distance between outer edges of tires
measured side-to-side
Battery Dimensions: 5.44 x .94 (138 x 24mm)
Maximum Battery Dimensions: 5.75 x 1.2 (147 x 32mm)
Tire Diameter: 4.6 (117mm)
Tire Width: 1.4 (35.6mm)


For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11x4mm Steering Knuckles 2 AXIC0221
2 10x15x4mm Steering Knuckles 1 AXIC0230
1 5x11x4mm Driveshaft 1 AXIC0221
1 5x14x5mm Driveshaft 1 AXIC4407
2 5x14x5mm Fr Universals 1 AXIC4407
2 7x14x3.5mm Fr Diff Locker 1 AXIC4406
1 5x14x5mm Fr Bevel Gear 1 AXIC4407
2 5x11x4mm Rear Axles 1 AXIC0221
2 7x14x3.5mm Rear Diff Locker 1 AXIC4406
1 5x14x5mm Rear Bevel Gear 1 AXIC4407
4 5x11x4mm 2-Speed 2 AXIC0221
6 5x10x4mm Trans Gears 3 AXIC0218

jxs 040919



Product Documents & Files

Manufacturer Contact Information