E-flite Su-30 Twin 70mm EDF BNF Basic w/AS3X & SAFE Sel

Tower Stock# LXLJLB  •  Manufacturer Stock# EFL01050
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Notes from our tech department:
**For Intermediate Pilots**


Construction: EPA foam
Wing: Two-piece with composite wing tube
Receiver: Spektrum 6-ch AR636A DSMX with AS3X (Artificial
Stabilization - 3aXis) that counters effects of wind and turbulence
by combining 3-axis sensing with specially tuned flight control
software, also includes Panic Recovery Mode, a feature of SAFE
(Sensor Assisted Flight Envelope) that returns airplane to level
flight at the push of a button
Brushless Motors: Two 2860 1850Kv
Servos: 9g Metal Gear, 9g Metal Gear Reverse, 13g Metal Gear, 13g
Analog Metal Gear
Ducted Fan Size: 2.7" (70mm)
Canopy: Clear molded plastic with dual cockpit and one pilot figure
Approximate Assembly Time: 1-3 hours
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.


E-flite Su-30 70mm EDF BNF Basic with AR636A Receiver with AS3X
and SAFE Select
Two 70mm Ducted Fan Units
Two 2860-1850Kv Brushless Motors
Main and Nose Gear Retracts
80A Brushless ESC
Spektrum 6-ch Receiver
Instruction Manual


LiPo Battery: 6S 5000mAh
Battery Charger: Compatible with selected battery
Transmitter: At least 6-channel
Field and maintenance equipment


Length: 64.6" (1640mm)
Wingspan: 43.3" (1100mm)
Flying Weight: 9.6bs (4380g)
Wing Tube Length: 27.2" (690mm)
Wing Tube Outer Diameter: 0.39" (10mm)
Maximum Battery Size: 7 x 2.5 x 1.5" (178 x 63.5 x 38mm)
Center of Gravity (CG): 4.5 - 5.9" (115 - 150mm) back from the
leading edge of the wing at the wing root

Control Throws: High Rate
Elevator, up: 1.6" (40mm)
down: 1.3" (34mm)
Aileron, up/down: 0.59" (15mm)
Rudder, left/right: 1.1" (28mm)
Elevator: Low Rate 5%, High Rate 10%
Aileron: Low Rate 5%, High Rate 10%
Rudder: Low Rate 5%, High Rate 10%

jxs 10/24/19