Onyx 7.4V 5000mAh 2S 35C LiPo Hard Case: EC3

Tower Stock# ONXC1004  •  Manufacturer Stock# ONXP50002S35
Shipping Note:Details
Product WarningDetails
Notes from our tech department:


Pre-wired with an EC3 connector and JST-XH balance connector
Capable of maximum continuous discharge rates up to 35C


Onyx 7.4V 5000mAh 35C 2S LiPo Hardcase Battery with EC3
Connector and JXT-XH Balance Connector


LiPo Charging Bag
LiPo Compatible Battery Charger


Connector Type: EC3
Discharge Lead Wire Gauge: 12AWG
Discharge Lead Length: 3.34 (85mm)
Balance Lead Length: 3.1 (80mm)
Balance Connector: JST-XH
Voltage: 7.4V
Capacity: 5000mAh
Cell Configuration: 2S1P
Dimensions, L, W, H: 5.45 x 1.83 x 0.93 (138.5 x 46.5 x 23.5mm)
Maximum Continuous Discharge Current: 175A
Maximum Continuous Discharge Rate: 35C
NormalStandard Charge Current: 5.0A
NormalStandard Charge Rate: 1C
Shape: Rectangular
Watt Hours: 37.0Wh


ALWAYS use a LiPo-approved Charger and Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS Charge in a fireproof location
ALWAYS set chargers output volts to match battery volts
ALWAYS keep out of reach of children

jxs 062419


Manufacturer Contact Information