Hangar 9 Timber 110 30-50cc ARF

Tower Stock# LXLCYM  •  Manufacturer Stock# HAN2530
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments of $233.33 Details
Notes from our tech department:


Construction: Balsa and ply
Wing: Two-piece with joiner tube
Ailerons and Flaps: Dual servo control
Covering: Hangar 9 UltraCote
Landing Gear: Main, two-piece prebent aluminum, rear, steerable
Motor Mount: Plywood
Engine Mount: Aluminum standoffs


Prebuilt Wing, Tail and Fuselage sections, Landing Gear, Fuel Tank
and Instruction Manual


Radio: At least 6-channel
Servos: Seven high torque, high speed high voltage, one more required
for throttle if using gasoline engine
9" Heavy Duty Servo Extension: Two
18" Heavy Duty Servo Extension: Four
36" Heavy Duty Servo Extension: Two
48" Heavy Duty Servo Extension: Two
3" Aluminum Double Servo Arm: One
Spinner: 3"
Building and field equipment

Electric Power-
Brushless Motor: Great Planes Rimfire 1.70 63-62-200 outrunner
ESC: Compatible with motor
Receiver: 9-channel
Propeller: 20x10E
LiPo Batteries:
Battery Harness: IC5 series harness

Gasoline Power-
Engine: 35 or 55CC
Propeller: 18x10 for 35cc engine, OR 22x8 or 23x8 for 55cc engine
Servo: One for throttle
Receiver: 12-channel telemetry
Ignition Battery: 2S LiPo, 4000mAh
Fuel filler, fuel tubing


Wingspan: 110" (2.79m)
Wing Area: 1466 sq in (94.6 sq dm)
Wing Loading: 29.4 oz/sq ft (89.71 g/sq dm)
Flying Weight: 17 - 19 lbs (7.7 - 8.6 kg)
Length: 68" (1.73m)
Airfoil: Symmetrical
Configuration: High wing
Center of Gravity: 3.5" (89mm) behind leading edge of wing for sport
flying, 4" (101.6mm) for STOL flying
Control Throws:
High Rate Mid Rate Low Rate
Ailerons: Up 1-11/32" (60mm) 1-31/32" (50mm) 1-9/16" (40mm)
Down 1-31/32" (50mm) 1-9/16" (40mm) 1-3/8" (35mm)
Elevator: 1-3/32" (50mm) 1-3/8" (35mm) 1" (25mm)
Rudder: 3-15/16" (100mm) 3-1/8" (80mm) 2-13/16" (65mm)
Aileron Expo: High 30%, Mid 25%, Low 20%
Elevator Expo: High 30%, Mid 25%, Low 20%
Rudder Expo: High 30%, Mid 25%, Low 20%


Following are the colors of UltraCote used to cover this model, and
order numbers for 6' rolls:
Bright Yellow, HANQ1125
Deep Blue, HANQ1127
True Red, HANQ1118
Silver, HANQ1137

jxs 04/30/19



Product Documents & Files

Manufacturer Contact Information