Top Flite Giant F6F Hellcat Ready to Cover 55-61cc 86"

Tower Stock# LXLCLV  •  Manufacturer Stock# TOPA0756
Top Flite Giant F6F Hellcat Ready to Cover 55-61cc 86
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
**The pictures above show the covered version of the aircraft.**
In this RTR version cowling is unpainted and control surfaces are not prehinged

FEATURES

Construction: Balsa and ply
Wing: Two-piece with aluminum wing tube, two LED wing tip lights
Cowl: Fiberglass, dummy radial engine detail
Canopy: Clear plastic with painted-on frame lines
Landing Gear: None, wheels are included but landing gear is not,
designed for Robart pneumatic or electric retracts, two main
wheels, 1-3/4" (44mm) tailwheel
Warranty: Top FliteŽ Models guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged by use or
modification. In no case shall Top Flite's liability exceed the
original cost of the purchased kit.

INCLUDES

RTC Preassembled Wing, Tail and Fuselage components, Wheels, Fuel
Tank, two Aluminum Stabilizer Tubes, Tail and Wing Lights,

REQUIREMENTS

Radio: 7-channel minimum, 7-channel receiver for basic set up,
11-channel receiver for advanced set up, 13-channel receiver for
optional drop tank, and if lights will be controlled through
receiver
Servos: All control surfaces require metal gear servos w/at least
95 oz-in of torque (2-aileron, 2-flap, 2-elevator, 1-rudder,
1-tailwheel, 1 (40 oz-in)-throttle if using gasoline engine
Glues, and Field Equipment, Covering, Sealing Iron, Heat Gun

Gasoline Power;
3.4 - 3.7 cu in (55 - 61cc) engine
Propeller: Compatible with selected engine
Ignition battery

Electric Power;
Motor: Rimfire .65 (80-85-160) outrunner brushless recommended
ESC: 160A high voltage if using recommended motor
Battery: 12S (2x6S) 5000 - 5500mAh
Propeller: 22x10 recommended
Propeller: 22 x 10- 26 x 12 (due to the high torque and high RPM of
this motor the use of electric-only propellers is not recommended)

SPECIFICATIONS

Wingspan: 86" (2184mm)
Wing Area: 1358 sq in (87.6 sq dm)
Weight: 24.7 - 27lb (11,222 - 12,247g)
Wing Loading: 42 - 46 oz/sq ft (128 - 140 g/sq dm)
Length: 66.3" (1683mm)
Center of Gravity, (CG): 6" (152mm) back from leading edge of top of
wing at joint between wing center section and outer wing panels
Control Throws: Low Rate High Rate
Elevator: 3/8" (9mm) 5° 5/8" (16mm) 9°
Rudder: 7/8" (22mm) 13° 1-1/4" (32mm) 19°
Ailerons: 3/4" (19mm) 13° 1' (25mm) 18°
Flaps 1-5/8" (41mm) 33° down

COMMENTS

**The replacement parts listed for this airplane are covered in
Top Flite MonoKote**

jxs 01/14/19
ir/jxs

Resources

References

Manufacturer Contact Information