Tekin 1/18 Mini Rage Micro Fwd/Rev Brushless ESC

Tower Stock# LXKYN7  •  Manufacturer Stock# TT1100
Tekin 1/18 Mini Rage Micro Fwd/Rev Brushless ESC (large view)
Easy Pay
Request 2 Payments ($36.50, $36.49) Details
Notes from our tech department:
This is the Tekin Mini Rage Electronic Speed Control
for 1/18 scale vehicles.


On-board programming
Adjustable drag brake and reverse brake strength
Programmable Reverse lockout and low voltage cutoff
Adjustable throttle and Brake profiles (2 modes with 7 profiles each)
Pre-installed Futaba J plug (JR and KO plugs also included)
Pre-Installed ON/OFF switch
Three wire design with pre-installed 3.5mm bullet connectors
Ball bearing-supported
Sensorless and brushless 5.4kV with high performance bearings


Tekin Mini Rage Speed Control
Three 3" long leads with 3.5mm female bullet connectors installed
Two 3.5" long leads (no connector, one black and one red wire)
Four 1x1" pieces of double sided tape
Two 2.5x5mm hex head motor mounting screws (requires 2mm hex wrench)
Two black plastic radio connectors (JR and KO)
Three sheets of Tekin logo decals (various colors included)


Installation following the included intructions sheet, battery
connectors of modeler's choice, soldering iron and solder


Length: 1.72" (44mm)
Width: 0.95" (24mm)
Height: 0.4" (10mm)
Weight: 0.9oz (24.5g)
Power: 25A
Surge: 60A
Resistance: 0.0045
Input power (except 8kV motor): 4-12 cells NiCd/NiMH or 2-4 cell LiPo
Input power (8kV motor): 4-8 cell NiCd/NiMH or 2-3 cell LiPo
Power Wires: 16AWG silicone


Designed to work with a specific Tekin motor

jxs 6/28/05

Manufacturer Mailing Address
Additional Manufacturer Contact Info