Team Losi Racing 8IGHT X-E Race Kit: 1/8 4WD E-Buggy

Tower Stock# TLRC2098  •  Manufacturer Stock# TLR04008
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Notes from our tech department:


Chassis: 7076-T6 hard anodized aluminum, 0.12 (3mm) thick
increased width aids in stability and gives a more neutral feel,
plastic side guards
Drive Four wheel shaft
Differentials: Sealed viscous filled planetary gear type, altered
cases allow easier access
Shocks: Aluminum body oil-filled, machined aluminum caps with
bleeder holes
Shock Towers: Machined from 7075-T6 aluminum with updated camber link
Suspension: All new suspension arms designed to accept stiffener
plates that allow racers to tune the flex of the suspension,
molded stiffener plates included, optional carbon fiber plates
available separately
Body: Clear 8XE, cab forward design for greater overall downforce
for better steering and overall stability, IFMAR legal wing
Motor Mount: Lightweight and easily adjustable, motor now mounts to
chassis rather hanging off of center diff for added durability
Steering: Redesigned rack allows more Ackermann adjustments, and an
improved servo saver to eliminate bellcrank bind, Ackermann
describes the effect of the inner front wheel rotating faster than
the outer front wheel during turns
Caster: 20 blocks, adjustable, castertoe-in refers to the angle
of the suspension when viewed from the side of the car in relation
to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Wheels: Dish type 3.3 (83.5mm) diameter, 1.7 (42mm) wide, white in
Ball Bearings: Full set
Warranty: Horizon Hobby, LLC (Horizon) warrants to the original
purchaser that the product purchased (the Product) will be free
from defects in materials and workmanship at the date of purchase


TLR 18 scale 8IGHT X-E Race Buggy Kit with clear Body, Wing, Wheels,
and Instruction Manual


Radio: At least 2-channel
Steering Servo: High-voltage, high torque metal gear designed for 18
scale vehicles
Brushless Motor: 18 scale off-road racing
Electronic Speed Control: Compatible with selected motor
LiPo Battery: 4S 14.8V, at least 4500mAh
Battery Charger: Compatible with selected battery
Tires: 18 scale buggy
LiPo charging bag, building and track equipment


Length: 19.6 (497mm)
Width: 12.1 (308mm)
Height: 7.1 (180mm)
Ground Clearance: 2.4 (60mm)
Wheelbase: 12.8 - 13 (326 - 329mm)
Front and Rear Track: 12.1 (308mm) distance from outer edges of
tires measured side-to-side
Internal Gear Ratio: 3.23:1
Gear Pitch: MOD1
Pinion Gear: 15T
Spur Gear: 46T
Approximate Assembly Time: 3-5 hours


For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
1 8x14x4mm flanged Rear Diff 1 LOSC1968
1 8x14x4mm flanged Center Diff 1 LOSC1968
1 8x14x4mm flanged Front Diff 1 LOSC1968
1 8x14x4mm flanged Front Diff Ring 1 LOSC1968
1 8x14x4mm flanged Spur Gear 1 LOSC1968
1 5x11x4mm Fr Gearbox 1 LOSC1967
1 5x13x4mm Fr Gearbox 1 LOSC1972
4 8x16x5mm Fr Spindles 2 LOSC1962
4 8x16x5mm Rear Hubs 2 LOSC1962
1 5x11x4mm Fr Pinion Gear 1 LOSC1967
1 5x13x4mm Fr Pinion Gear 1 LOSC1972
1 5x11x4mm Rear Pinion Gear 1 LOSC1967
1 5x13x4mm Rear Pinion Gear 1 LOSC1972

jxs 012119