Team Losi Racing 22 5.0 Kit: 1/10 2WD Astro/Carpet

Tower Stock# LXKGVJ  •  Manufacturer Stock# TLR03017
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments ($106.67, $106.66, $106.66) Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:


Chassis: 7075-T6 milled aluminum 2mm thick, Stiffezel mud guards
and waterfalls
Drive: 2-wheel with 68mm driveshafts that allow the pin to sit
further inside the outdrive cup for less bone lock
Slipper Clutch: Super Heavy Duty Slipper (SDHS), all new slipper
plates, pads, spring, spur gears and new top shaft, new pads allow
the use of 69T-84T spur gears
Differential: Gear type with molded composite gears and cross pins,
more fluid capacity with larger gear surfaces for more consistent
performance over time, +1.75mm +2.5mm, and +3.5mm diff height
inserts to optimize bone angle and plunge
Transmission: 3-gear laydown configuration moves motor forward to a
more central location
Shocks: Gen3 12mm Big Bore-oil-filled, 3mm diameter shock shafts,
other improvements include screw mounted pistons, new molded caps,
and thinner collar for more adjustments, adjustable rear shock
Suspension: Lower A-arm, upper adjustable links front & rear
Front Roll Center: Adjustable, standard Low Roll Center (LRC) and
High Roll Center (HRC) front pivots and kick shim, newly included
1mm thick kick shim allows a 3mm adjustment window
Steering: Geometry improved by increasing length of bell cranks and
spindle arms, and changing Ackermann angle for smoother feel and
increased low speed steering for tighter tracks and 180's
Wheels: Fluorescent yellow dish type, Stiffezel front wheels
provide more consistent front grip, and more steering in high load
turns, 12mm hex, 2.2" (56mm) diameter
Body: Clear precut polycarbonate construction, lightweight body
pulled from 0.7mm thick PC plate
Rear Wing: TLR 6.5 pulled from 1.2mm thick polycarbonate
Ball Bearings: Full set rubber sealed
Battery Fitment: Battery cradles key into mud guards for five fixed
positions, battery secured by elastomer straps on each end
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, 3rd camber link option allows the 22 5.0 to be
better dialed-in on more different grip levels, camber refers to
the angle of the tops of the tires from vertical when viewed from
front or behind vehicle


TLR 1/10 scale 22 5.0 Buggy Race Kit Astroturf/Carpet with Body,
Front and Rear Wings, Motor Fan Mount and Instructions,
Optional parts include full machined shock internals, TLR low
frequency springs, adjustable rear toe plate and anti-squat block,
front and rear sway bars, and the following aluminum parts:
front axles, rear camber block, ball stud washers and clamping


Radio: 2-channel with high torque steering servo
Motor: 540 size, 17.5T recommended
Electronic Speed Control: To match selected motor
Tires: 1/10 scale buggy
Pinion Gear: 48 pitch
LiPo Battery: 2S hardcase
Battery Charger: Compatible with selected battery
LiPo Charging Bag, Paint, tools, building and track equipment


Length: 15" (382mm)
Width: 9.8" (250mm)
Height: 5.8" (148mm)
Wheelbase: 11" (280mm)
Front and Rear Track: 9.8" (249mm) distance from outer edges of
tires measured side-to-side
Internal Gear Ratio: 2.43:1
Approximate Assembly Time: 3-5 hours


For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
1 5x8x2.5mm Outdrive 1 TLRC1344
4 3x6x2.5mm Steering 2 LOSC2309
4 5x10x4mm Fr Uprights 2 TLRC1919
2 10x15x4mm Gearbox 1 LOSC1963
4 5x10x4mm Gearbox 2 TLRC1919
2 10x13x4mm Rear Hubs 1 LOSC1972
2 5x10x4mm Rear Hubs 1 TLRC1919

jxs 12/06/18



Product Documents & Files

Manufacturer Contact Information