Dumas Waco ARE Kit 35"

Tower Stock# LXKAR6  •  Manufacturer Stock# 1805
Dumas Waco ARE Kit 35
Notes from our tech department:
This is the electric powered, radio controlled, park scale
Dumas WACO ARE Airplane Kit.


Construction: Laser cut balsa
Wing: Two piece with center section, high mount placement
Covering: Two sheets of red and two sheets of white tissue
Cowl: Vacuum molded plastic, white in color
Wheels: Two 1.75" (45mm) diameter lightweight foam main wheels and
one 0.75" (19mm) plastic tail wheel
Windows: Three sheets acetate with pattern in manual for all windows


All required balsa, One sheet of yellow tissue, cowl, one fake
engine decal, two wheels, one sheet, hardware, instruction
manual and two full-size plan sheets.


Electric Motor: GWS "A" or MPI EPU-6 drive unit
Radio: 3-channel with micro size receiver
Servos: Two micro size for rudder and elevator
Electronic Speed Control: 5A with BEC
Battery: 7.4V 700mAh Lithium Polymer
Propeller: 9x7 for electric application
Finish For Covering: Butyrate dope such as Midwest Aerogloss, light-
weight Mylar covering can also be used, see COMMENTS
Building and field equipment


Wingspan: 35" (889mm)
Center of Gravity (CG): 2-7/16"(62mm) from the leading edge of the
wing measured at the fuselage
Control Throws:
Elevator: up and down 3/4" (19mm)
Rudder: left and right 5/8" (16mm)
Airfoil: Flat bottom


Do not use Ultra Cote or MonoKote covering. It is too heavy and will
shrink too much damaging the lightweight structures.

NNA 8/3/05

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info