Mugen MBX8TE 1/8 Electric Truggy Kit

Tower Stock# LXJUBK  •  Manufacturer Stock# MUGE2024
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
Notes from our tech department:


Chassis: 0.12 (3mm) thick A7075 hard anodized aluminum
with plastic side guards
Drive: Four wheel shaft drive
Differentials: Three high-traction, bevel gear type with new larger
volume diff cups for better performance in bumpy and low grip
conditions, and increased traction and fuel mileage, new straight
cut 10 tooth bevel gear, and 46 tooth conical gear for increased
acceleration, runtime and efficiency
Center Differential Mount: New top plate reduces chassis flex and
increases clutch bell, spur gear, and clutch bearing life, and
also allows easier brake adjustment
Gearboxes: New design allows removal of the differential without
detaching suspension arm mounts
Shocks: Hard anodized aluminum body oil-filled 16mm with 3.5mm shock
Shock Towers: 0.16 (4mm) thick aluminum
Suspension: New longer box shaped arms and arm stiffeners, steel
anti-roll bars
Body: Precut ProLine cab forward, molded from clear polycarbonate
Wing Mount: New lightweight one-piece with adjustable height
Pinion Gear: Steel construction
Battery Box: Molded plastic, mounted to an updated carbon fiber
radio plate
Camber Tie Rods: Adjustable, Camber describes the angle at which the
tires sit vertically
Steering Tie Rods: Adjustable, CasterToe-in is the angle at which
the tires point inward as viewed from above


Mugen 18 scale MBX8TE Electric Powered Truggy Kit, with ProLine
Body, Rear Wing, Pinion Gear, and Instruction Manual


Radio: 2-channel with high-torque steering servo
Motor & ESC: 18 scale truggy compatible brushless
Battery: 2S LiPo recommended depending on motor and ESC
Battery Charger: To match selected battery
Tires and Wheels: 18 scale off-road buggy
AA Batteries for TX, Paint, Tools, Building and Track Equipment


Finished size of kit not provided by manufacturer


For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Center Diff 1 DTXC1585
2 8x16mm Center Diff 1 DTXC1585
2 6x13mm Front Gear Box 1 DTXC1573
2 6x13mm Rear Gear Box 1 DTXC1573
2 15x21mm Front Uprights 1 ARAC3162
2 8x16mm Front Uprights 1 DTXC1585
2 15x21mm Rear Uprights 1 ARAC3162
2 8x16mm Rear Uprights 1 DTXC1585
4 6x10mm Steering 2 DTXC1561

jxs 110518



Manufacturer Contact Information