Associated Button Head Phillips Screw M2.5x3 RC18T (4)

Tower Stock# LXJHS5  •  Manufacturer Stock# 21131
Associated Button Head Phillips Screw M2.5x3 RC18T (4) (large view)
Notes from our tech department:
This is the Electric Powered, Radio Controlled, 1/10 scale
RC10TC7 Factory Team Touring Car Kit from Team Associated.


Chassis: Graphite laminate 0.088" (2.25mm) thick
Drive: Four wheel belt with front spool with replaceable outdrives
and rear gear differential
Rear Differential: Lightweight ball type
Shocks: Fox shocks with genuine Kashima coat
Motor Mount: Redesigned one-piece, centrally located to produce the
most consistent chassis flex for predictable cornering
Steering: Updated dual bellcrank system with low CG and refined
Ackermann range for best performance on any track condition,
Ackermann refers to the effect of the inside wheel front wheel
turning faster than the outside front wheel during turns
Bumper: Front foam
Turnbuckles: Titanium for strength and light weight
Ball Bearings: Full set, 22 total
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


RC10TC7 Factory Team Touring Car Kit, Shocks, bottle of Silicone
Shock Fluid and Silicone Diff Fluid, Decal Sheet and Instruction


Radio: 2-channel with high-speed steering servo
Motor: 540 size brushless
ESC: To match selected motor
Battery: 3.7V-7.4V LiPo, or 6.0V LiFe
Battery Charger: To match selected battery
LiPo Charging Bag: If using LiPo battery
Pinion Gear: 48 pitch, number of teeth to be determimed by motor and
track conditions
Tires and Wheels: 1/10 scale touring car
Body: 1/10 scale polycarbonate touring car
Paint, building and track equipment


Length: 14.17" (360mm)
Width: 7.48" (190mm)
Wheelbase: 9.9 - 10.1" (253.5 - 257.5mm)
Internal Gear Ratio: 2.0:1
Weight: 1.14lbs (360mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Fr Spool 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
4 4x7mm Steering 2 DTXC1507
1 4x8mm flanged Spur Gear 1 DTXC1517
4 5x10mm Fr Uprights 2 DTXC1535
4 5x10mm Rear Uprights 2 DTXC1535

jxs 12/11/15

Parts Compatibility
Manufacturer Mailing Address
Additional Manufacturer Contact Info