Associated 1/10 RC10B6.1 Factory Lite 2WD EP Kit

Tower Stock# LXJHLL  •  Manufacturer Stock# 90022
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 3 Payments ($110.01, $109.99, $109.99) Details
Notes from our tech department:
More than 45g lighter in weight than the original B6.1D
the Factory Lite was designed to excel in classes requiring Spec motors.

Parts used to achieve the weight savings include the MIP Pucks
system, 7075-T6 Aluminum Outdrives,
Bi-Metal Lightweight R-CVD Bones, Factory Team Direct Drive System
and a Lightweight Body

FEATURES

Chassis: Hard anodized aluminum, 0.098" (2.5mm) thick pocketed
chassis, optional weights (not included) allow weight bias tuning,
repositioned A plate provides maximum front end clearance
Drive: Rear wheel with Factory Team Direct Drive System, aluminum
rear clamping hex with laser etching
Front Axle: Aluminum 5.0mm with adjustable height
Rear Axle: Heavy duty V2 with 67mm bones
Transmission: Stealth laydown 3-gear type offers lower CG and
reduced polar moment, lightweight aluminum top shaft
Differential: Gear type for greater speed and forward acceleration
adjustable diff height can be matched to various ride heights
Suspension: Gull-wing front arms for lower CG and increased on-
power steering, updated ball cups and turnbuckles for precise
adjustment and durability, front and rear anti-roll bars
Motor Mount: Aluminum, central positioning for optimum side-to-side
balance
Shocks: V2 springs for a more reactive and nimble feel, one-piece
shock bushing for easier assembly, rear arm with molded inserts for
ultra-fine lower shock mount adjustment
Shock Towers: Heavy-duty V2 routed graphite shock towers with
tower guard on front shock tower
Ball Bearings: Full set Factory Team upgraded, oiled instead of
greased for less drag
Steering: One-piece blocks with bolt-on Ackermann plate, Ackermann
refers to the effect of the inner front wheel rotating faster than
the outer front wheel during turns, reverse bell-crank steering
rack design offers more room for electronics
Body: B6 clear buggy, screw-mounted wing by JConcepts
Battery Hold-Down Strap: Adjustable to allow weight bias tuning,
allows the use of optional turnbuckle based braces
Caster: Adjustable front and rear, caster/toe-in refers to the angle
of the front when viewed from the side of the car in relation to
the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

INCLUDES

RC10B6.1 Factory Lite Buggy Kit with Body, Rear Wing, Shocks, Decals
and Instruction Manual

REQUIREMENTS

Radio: 2-channel with high-torque steering servo
Motor: 540 size
ESC: Compatible with selected motor
Battery: 7.4V LiPo or 6.6V LiFe, saddle, shorty or square pack
Battery Charger: Compatible with selected battery
Wheels: 1/10 scale buggy
Tires: 1/10 scale buggy
Pinion Gear: 48P
Paint, building and track equipment

SPECIFICATIONS

Vehicle;
Length, Width and Weight will vary depending on equipment used
Internal Gear Ratio: 2.6:1
Body;
Length: 12.1" (308mm)
Width: 5" (127mm)
Height: 2.7" (68mm)

COMMENTS

For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3x7x3mm Steering Rack 2 DTXC1506
4 3x7x3mm Steering Bellcranks 2 DTXC1506
4 5x10x4mm Steering Blocks 2 DTXC1535
4 5x10x4mm Gearbox 2 DTXC1535
2 10x15x4mm Differential 1 DTXC1595
2 6x13x5mm Rear Hubs 1 DTXC1573
2 10x15x4mm Rear Hubs 1 DTXC1595

jxs 08/29/18
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info