Associated TC7.2 Factory Team Kit

Tower Stock# LXJHHR  •  Manufacturer Stock# 30122
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Notes from our tech department:

FEATURES

Chassis: Graphite laminate 0.088" (2.25mm) thick with optimized
flex characteristics
Drive: Four wheel belt drive, DCV front driveshaft assemblies with
ultra lightweight front spool with replaceable hardened steel
outdrives, aluminum rear CV bones
Rear Differential: All new ultra-precise aluminum construction
Shocks: Fox shocks with genuine Kashima coat
Suspension: Ultra-lightweight carbon composite
Motor Mount: New one-piece IFM (Inline Flex Mount) adds several
mounting configurations to fine tune chassis flex to racing surface
also has integral mounting position for an optional chassis pitch
control system (PCS)
Servo Mount: Updated floating design
Battery Mount: Newly designed for greater adjustability
Steering: Floating steering servo mount with updated dual bellcrank
system with low CG and refined Ackermann range for best
performance on any track condition, Ackermann refers to the effect
of the inside wheel front wheel turning faster than the outside
front wheel during turns
Bumper: Front foam
Turnbuckles: Titanium for strength and light weight
Ball Bearings: Full set, 26 total
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
updated bearing caps with integral camber link mount for ultra-fine
link length adjustments

INCLUDES

Team Associated 1/10 scale Electric Powered, RC10TC7.2 Factory Team
Touring Car Kit, Shocks, bottle of Silicone Shock Fluid and
Silicone Diff Fluid Decal Sheet and Instruction Manual

REQUIREMENTS

Radio: 2-channel with high-speed steering servo
Motor: 540 size brushless touring car motor
ESC: To match selected motor
Battery: 7.4V LiPo, or 6.0V LiFe
Battery Charger: To match selected battery
LiPo Charging Bag: If using LiPo battery
Pinion Gear: 48 pitch, number of teeth to be determimed by motor and
track conditions
Tires and Wheels: 1/10 scale touring car
Body: 1/10 scale 190mm wide polycarbonate touring car
Paint, building and track equipment

SPECIFICATIONS

Length: 14.17" (360mm)
Width: 7.48" (190mm)
Wheelbase: 9.9 - 10.1" (253.5 - 257.5mm)
Weight: 1.12lbs (508g) chassis only

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Fr Spool 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
4 4x7mm Steering 2 DTXC1507
1 4x8mm flanged Spur Gear 1 DTXC1517
4 5x10mm Fr Uprights 2 ASCC3734
4 5x10mm Rear Uprights 2 ASCC3734

jxs 08/21/18
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info