Losi 1/10 Baja Rey 4WD Desert Truck Brushless BND

Tower Stock# LXJGYY  •  Manufacturer Stock# LOS03025
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 3 Payments ($116.67, $116.66, $116.66) Details
Money Saving Combos
Notes from our tech department:


Chassis: 0.12" (3mm) hard anodized aluminum, stamped aluminum plate
ties into roll cage,
Roll Cage: Fully molded with four piece bolt-on panel design like
the Losi 5IVE-T
Drive: Four wheel
Transmission: Enclosed, single speed with all-metal gears to
handle up to 3S LiPo power
Differentials: Front and center sealed, can be tuned with different
weight fluids
Receiver: SRS6000 DSMR with AVC (Active Vehicle Control) built in
that allows driver to adjust amount of traction control, system can
also be switched off
Steering Servo: Metal gear
Electronic Speed Control: Dynamite Fuze 130A sensorless, waterproof
Brushless Motor: Dynamite Fuze 3800Kv, non-sensored 550 size, fixed
motor position
Battery Tray: Bottom loading for quick battery changes without
removing body
Suspension: Front, high-travel independent, Rear, 4-link live axle
Shocks: Long travel oil-filled aluminum body coil over, threaded
bodies with adjustment collars, 3.9" (100mm) front, 4.8" (122mm)
rear, 30wt silicone oil
Body: Four piece bolt-on panels with screened graphics
Tires: Desert claws, medium compound, 4.45" (113mm) diameter
Wheels: Desert Wheel 3.0/2.2" (76.2/55.9mm) SC wheel size
Ball Bearings: Complete set
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.


1/10 scale Baja Rey Bind-n-Drive 4WD Brushless Powered Desert Racer
from Losi with screened Body panels, Receiver, 130A ESC,
3800Kv Motor, 4-way Wrench, Turnbuckle Wrench, 1.5mm & 2.0mm
Hex Wrench and Instruction Manual


Transmitter: 2-3 channel Spektrum
LiPo Battery: 7.4 5000mAh 2S 30C Hardcase with EC3 Connector
Battery Charger: Compatible with selected battery
LiPo Charging Bag
Track equipment


Length: 21.6" (540mm)
Width: 12.6" (320mm)
Height: 7.6" (190mm)
Weight: 6.1lbs (2.8kg)
Ground Clearance: 2.2" (55mm)
Wheelbase: 14.6" (370mm)
Gear Pitch: 1.0 module
Front and Rear Track: 11.6" (295mm) distance from outer edges of
wheels measured side-to-side
Internal Gear Ratio: 3.8:1
Final Drive Ratio: 10.99:1
Spur Gear: 43T
Pinion Gear: 13T


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3.6x2.5mm Steering 2 LOSC2309
2 10x15mm Front Diff 1 LOSA1974
2 10x15mm Rear Diff 1 LOSA1974
2 12x18mm Ctr. Trans Gear 1 LOSC1973
2 5x10mm Front Gearbox 1 LOSC1958
2 5x10mm Rear Gearbox 1 LOSC1958
2 5x10mm Ctr. Driveshaft 1 LOSC1958
4 6x12mm Front Axles 2 LOSC1960
2 10x15mm Rear Axles 1 LOSC1974
2 6x12mm Rear Axles 1 LOSC1960

jxs 10/01/18