HobbyZone Carbon Cub S+ 1.3m RTF

Tower Stock# LXHZYK  •  Manufacturer Stock# HBZ3200
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Shipping Restricted ItemDetails
Shipping Note:Details
Product WarningDetails
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:


Construction: EPO foam
Motor: Parkzone 480-size 960Kv brushless outrunner
Transmitter: Spektrum DXe DSMX
Receiver: SPM4647 serial receiver with SPMA3232 flight controller
SAFE+ Technology: Sensor Assisted Flight Envelope offers
AutoLand puts aircraft on approach to autonomously land near the
GPS initialization point
Holding Pattern: Returns airplane to a position above the GPS
initialization point and circles it until the command is cancelled
Virtual Fence: Creates an invisible boundary the airplane wont fly
past, after reaching this boundary the aircraft will automatically
turn around and fly back toward the GPS initialization point
Panic Recovery: Returns airplane to a level flight at the push of a
of a button
Beginner, Intermediate and Experienced Modes: Offer progressively
less control limitations as pilots skill level increases
Electronic Speed Control: Parkzone 18A brushless
Servos: Two for aileron, one for elevator, one for rudder
Landing Gear: Tricycle type, prebent wire with fairings and
oversized tundra tires, aircraft may be fitted with optional floats
(not included, separate purchase required)
LiPo Battery: 1300mAh 3S 11.1V 20C with EC3 connector
Battery Charger: E-flite DC Charger and AC Adapter
Propeller: 9x6 2-blade plastic
Spinner: Black plastic 1.6 (40mm) diameter
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the Product) will be free
from defects in materials and workmanship at the date of purchase.


Hobby Zone RTF Carbon Cub S+ 1.3m with Transmitter, SAFE Technology,
Motor, Prop, Spinner, ESC, Receiver, four Servos and Instruction


LiPo Charging Bag


Approximate Assembly Time: Less that 1 hour
Flying Weight: 36.1 - 37.9oz (1023 - 1075g)
Length: 34 (865mm)
Wingspan: 51 (1300mm)
Wing Tube Length: 16.1 (410mm)
Wing Tube Outer Diameter: 0.39 (10mm)
Center of Gravity, (CG): 2.4 - 2.7 (62 - 68mm) back from the
leading edge of the wing at the root

jxs 083118