Hangar 9 Christen Eagle II 90 ARF

Tower Stock# LXHVRN  •  Manufacturer Stock# HAN5010
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 3 Payments ($110.01, $109.99, $109.99) Details
Notes from our tech department:

FEATURES

Construction: Laser cut lightweight balsa and plywood
Wing: Two-piece plug-in with two aluminum joiner tubes
Cowl: Fiberglass, painted to match covering scheme
Canopy: Clear plastic with cockpit and pilot figure
Landing Gear: Main, one-piece prebent aluminum with steerable
tailwheel, plastic fairings and finished fiberglass wheel pants
3" (75mm) diameter main wheels, 1.25" (32mm) diameter tail wheel
Fuel Tank: 14.3oz (425cc)
Covering: Multi-color Eagle Hangar 9 UltraCote
Decals: Military and civilian type
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.

INCLUDES

ARF Christen Eagle II 90 54" Gasoline or Electric Powered Sport Scale
Airplane with Prebuilt Wing, Tail and Fuselage sections, Landing
Gear, Fuel Tank, Wing Struts and Instruction Manual

REQUIREMENTS

Radio: At least 4-channel
Servos: Four standard size (2-aileron, 1-rudder, 1-elevator)
1-throttle if using glow engine
3" (152mm) Servo Extensions: Four
Receiver Battery: 6V at least 2700mAh
For Brushless Power
Brushless Motor: E-flight Power 90 outrunner 325Kv recommended
ESC: 75A if using recommended motor
LiPo Batteries: Two 4S 14.8V 30C 4000mAh
Battery Charger: Compatible with selected battery
Propeller: 17x8E
For Engine Power:
Engine: 1.25 cu in 4-stroke, OR 1.20 cu in 2-stroke
Nitro Safe Fuel Tubing
Propeller: Depending on selected engine

Building and Field Equipment

SPECIFICATIONS

Length: 50.8" (129cm)
Flying Weight: 8.5 - 10lbs (3.85 - 4.50kg)
Wingspan: 54" (137cm)
Top Wing Area: 446 sq in (28.81 sq dm)
Bottom Wing Area: 432 sq in (27.90 sq dm)
Total Wing Area: 878 sq in (56.7 sq dm)
Wing Loading: 22.3-26.2 oz/sq ft (67.9-79.3 g/sq dm)
Approximate Assembly Time: 10-15 Hours
CG (Center of Gravity): 5 - 5-1/2" (127 - 140mm) behind leading
edge of upper wing at center
Wing Tube Dimensions:
Upper: 0.47 x 14.6" (12mm x 371mm)
Lower: 0.47 x 16.7" (12mm x 425mm)
Control Throws Low High
Ailerons, up/down: 0.59" (15mm) 33% Expo 0.87" (22mm) 42% Expo
Elevator, up/down: 0.98" (25mm) 30% Expo 1.4" (35mm) 42% Expo
Rudder, right/left: 1.4" (35mm) 35% Expo 1.8" (45mm) 45% Expo

COMMENTS

Following are the Hangar 9 UltraCote colors used to cover this
airplane, and stock numbers for 2m rolls;
White, HANQ1122
Deep Blue, HANQ1127
Orange, HANQ1132
Black, HANQ1129
Smoke Purple, HANQ1121
Deep Red, HANQ1124
Flame Red, HANQ1140
Dark Yellow, HANQ1148
Bright Yellow, HANQ1125

If a replacement fuel tank is needed, the DuBro 14oz (DUBQ0214), or
the Sullivan 14oz (SULQ1442) may be used.
Some modification and trimming to the inside of the fuselage may be
required when installing any aftermarket tank.

jxs 08/10/18
ir/jxs

Resources

References

Product Documents & Files

Manufacturer Contact Information