Top Flite 1/5 Giant F4U Corsair GP Kit 2.1-2.8,86.5"

Tower Stock# LXHU95  •  Manufacturer Stock# TOPA0410
Top Flite 1/5 Giant F4U Corsair GP Kit 2.1-2.8,86.5
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Tech Notices:Notice 1
Money Saving Combos
Money Saving Combos
Notes from our tech department:
The F4U CORSAIR "Gold Giant Scale Edition" is a WWII, Single Engine Fighter
Airplane. This 1/5th Scale Warbird boasts Scale Accuracy, along with the Ease
of Assembly made possible by Gold Edition Engineering.


Utilizes Familiar Wood Kit-Building Techniques, Tools and Material
Precisely Interlocking Parts designed through AUTOCAD, and a Photo
Illustated Manual help guide modelers through the assembly process
Kit includes many Precision-Formed Scale Details, such as a Molded
Cowling and Canopy.
In the Air, the Giant F4U Delivers Scale Flying Performance, and its
Large Size makes it Easy to See and Appreciate.
IMAA (International Miniature Aircraft Association) Legal


ABS Vacuum-Formed Cowl and Clear Canopy, Pushrods, Full-Scale Plans,
59 Page Photo-Illustrated Instruction Book, All Wood to complete
the kit, Decals, Fiberglass Tape and Hardware Package.


Engine: Gas 2.5-4.1 cu in (41-70cc)
Glow 2.1-2.8 cu in (35-45cc)
Propeller: Specific to engine purchased, display prop in photo on box
is handmade for display only, for flying, a 2-bladed prop is
suggested because they are more efficient.
Engine Mount, 5" Spinner, Fuel Tank 32oz, Gas or Glow Fuel-
Tubing 36", Easy Filler Fuel Valve for Gas or Glow,
Radio: 6-7 Channel
Servos: 3 Standard
(1-throttle, 1-tailwheel steering, 1-for retracts)
7 High Torque (45 oz-in minimum)
(2-ailerons, 2-flaps, 2-elevator, 1-Rudder)
Y-Harness: 4 (1-ailerons,1-flaps,1-elevator,1-rudder/tailwh steering)
Servo Wire Extensions (24"): 2
Switch and Charge Mounting Set, Heavy-Duty Control Horns
Receiver Battery: 6V, 1200mAh
Retracts: Main (ROBQ1655) Tailwheel (ROBQ2230)
Covering: Five Plus 6 Foot Rolls
Fuelproof Paint: Top Flite LustreKote
Misc. Items: Two 5" Main Wheels, One 1" Tailwheel, " Thick
Foam Rubber Padding (HCAQ1050), Twenty-Nine Heavy-Duty Hinge Points
Sixteen #6 " Sheet Metal Screws (for mounting the retracts),
1/4 to 1/5 scale Pilot Figure, Building and Field Equipment.
A Pull-Pull Cable System for the Steerable Tailwheel


Wingspan: 86.5" Wing Area: 1344.5 square inches
Fuselage Length: 67" Weight:(w/radio): 24-26 lbs
Wing Loading: 41-44.5 oz/ft Scale: 1/5.75
Airfoil: Fully-Symmetrical Low-Wing (Gull-Style)
CG: 5-3/4" aft of LE inverted at fuse with gear DOWN.
Throws: HI RATE LO RATE Incidences:
Elev " each " each Stab 0
Rud 2" each Wing 0
Ail 1" each " each Engine: 0 down 3 right
Flaps 1" Washout: 2 at tip


This kit can be fiberglassed or covered with film covering.
After-market parts (retracts, interior, pilot, etc.) are available.
See the optionals on the Accessory Completion Guide for these items.
Manual Recommends A 16-24oz Fuel Tank, Use A 32oz For Best Results.

Decal sheet CSRGD01 sold only through GP Manufacturing includes:
13" x 7" Blue & White stars and bars
9-1/8" x 5-1/8" Blue & White stars and bars
6-1/8" x 1" Yellow script Bayou Baby
2" Yellow boxing Bugs Bunny line art
5-7/8" x 2-5/8" Yellow 850
Two 1" x " Black 850
1-7/8" x " Black "Wild Hare Squadron"
3/8" White dot
6" x 1-5/8" Black & White instrument panel
3/16" black block letters:
No Step (4), No Push (6), Ammo 50 Cal. (3), Keep Clear (2),
Use Type D Starting Cartridge, Oil Filler Grade: 1100 12 US Gal
Marines 49850 F4U-1, Battery Compartment, Fuel 100/130 AN-F-28
178 US Gal, Attach APU Here, Pitot Tube Do Not Block, Servo
Access (2), 24V Input, Hydraulic Fluid Only, Ground Here,
Static Port, Sump Drain, Canopy Release, First Aid, CO2 Bleeder
Valve, Stow Tow Hook Here, Life Raft, Air Inlet, Tie-Down
Link (2), Inspection Access (3), Wing Lock (2), Tow Here (2),
Jack Point (2), Control Lock (2), Plane Captain Msgt. M Golema,
Mechanic 2CPO G Morenz.
Keep Clear (4), No Step (4), No Push (4), Tow Here (4), Jack
Point (2), Canopy Release (2), Inspection Access (4), Hydraulic
Fluid Only (2).
sdw 7/02
ENGINE MOUNTING: According to the plans it is 7-5/8 inches from the firewall
to the front of the thrust washer of the engine.

Know Before You Fly
Easy RC: Airplanes
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info