Team Losi Racing 8IGHT-E 4.0 Kit: 1/8 4WD Electric

Tower Stock# LXHSHD  •  Manufacturer Stock# TLR04004
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 3 Payments of $133.33 Details
Notes from our tech department:

FEATURES

Chassis: 7075 T-6 aluminum 0.16" (4mm) thick, with two battery and
ESC locations for more stability on high-speed tracks, or more
balanced power to front and rear under acceleration
Drive: Four wheel shaft drive with molded rubber boots on the CVAs
and center drivetrain dog bones to increase U-joint life
Differentials: Sealed viscous silicone filled
Motor Mount: Two center plates included, stock plate puts the motor
and differential directly in line with the chassis, optional plate
rotates the motor and differential 4.4 degrees to provide more
balanced power to the front and rear under acceleration
Suspension: Four wheel independent
Shocks: Aluminum body, oil-filled with new bleeder caps and
internal seals for easier rebuilds, new shock cap bushings for
greater durability
Shock Towers: Machined aluminum construction with new camber link
and shock location holes for more tuning options
Body: Cab-forward design
Caster: Adjustable, caster/toe-in refers to the angle of the front
when viewed from the side of the car in relation to the chassis
15 caster blocks with adjustable spindle height
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

INCLUDES

TLR 1/8 scale Electric Powered 8ight-E 4.0 Buggy Kit

REQUIREMENTS

Radio: 2-channel with high torque steering servo
Brushless Motor & ESC: 1/8 scale buggy
Battery: 4S LiPo at least 5000mAh
Battery Charger: To match selected battery
Tires and Wheels: 1/8 scale buggy
LiPo charging bag, building and field equipment

SPECIFICATIONS

Length: 19.6" (497mm)
Width: 12.1" (308mm)
Height: 7.1" (180mm)
Front Track: 12" (305mm)
Rear Track: 12.1" (307mm) distance from outer edges of wheels
measured side-to-side
Gear Pitch: 1.0 module

COMMENTS

For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 1/2x3/4" Fr Uprights 1 LOSC1970
2 8x16mm Fr Uprights 1 LOSC1962
2 1/2x3/4" Rear Uprights 1 LOSC1970
2 8x16mm Rear Uprights 1 LOSC1962
2 5x11mm Fr Diff Pinion Gear 1 LOSC1967
2 5x11mm Rear Diff Pinion Gea 1 LOSC1967
2 8x14mm flanged Fr Diff 1 LOSC1968
2 8x14mm flanged Rear Diff 1 LOSC1968
4 6x10mm Steering 1 LOSC1966

jxs 07/12/18