Team Losi Racing 22 4.0 SR Race Kit: 1/10 2WD SPEC

Tower Stock# LXHSGY  •  Manufacturer Stock# TLR03014
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Notes from our tech department:

FEATURES

Chassis: 7075-T6 aluminum with milled pockets to reduce weight
0.098" (2.5mm) thick
Drive: Two wheel, Direct Drive System with a shortened top shaft
narrower idler and diff gears, aluminum diff hubs with composite
outdrives and aluminum CVA driveshafts to reduce weight
Differential: Composite aluminum ball type
Transmission: Laydown configuration moves motor forward to a central
location, and provides two diff heights-standard 3.0mm for carpet,
and +3.5mm for carpet and Astroturf
Shocks: Oil-filled aluminum body Gen II 12mm Big Bore with X-Ring
seals, machined bushings and 2 x 1.6 x 2mm pistons, TiCN coated
shafts, low frequency springs and spring cups
Suspension: Stiffezel molded composite suspension arms, mud guards,
and waterfall chassis brace for more consistent and stable driving
Body: Low-profile lightweight clear polycarbonate 0.020" (0.5mm)
thick
Ball Bearings: Full set rubber sealed
Wheels: Dish type, 2.2" (56mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of
the tires from vertical when viewed from front or behind vehicle
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.

INCLUDES

TLR 1/10 scale Electric Powered 22 4.0 SR SPEC Racing Buggy Kit with
Wheels, Decals, Clear Body and Instruction Manual

REQUIREMENTS

Radio: 2-channel with high-torque steering servo
Brushless Motor: 540 size
Electronic Speed Control: Compatible with selcted motor
LiPo Battery: 7.4V
Battery Charger: Compatible with selected battery
Tires: 1/10 scale buggy
Pinion Gear: 48 pitch
LiPo charging bag, paint, tools track equipment

SPECIFICATIONS

Length: 15" (382mm)
Width: 9.8" (250mm)
Height: 5.8" (148mm)
Wheelbase: 11" (280mm)
Front and Rear Track: 9.8" (250mm) distance from outer edges of
tires measured side-to-side
Internal Gear Ratio: 2.43:1

COMMENTS

For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10mm Front Hubs 2 TLRC1919
4 5x8mm Steering 2 TLRC1344
4 5x10mm Rear Hubs 1 TLRC1919
2 5x8mm Differential 1 TLRC1344
2 10x15mm Gearbox 1 LOSA1963
4 5x10mm Gearbox 2 TLRC1919

jxs 07/13/18
ir/jxs

Resources