Dumas 1/24 1940 19' Barrel Back Kit 9 1/2"

Tower Stock# LXHPJ8  •  Manufacturer Stock# 1705
Dumas 1/24 1940 19' Barrel Back Kit 9 1/2
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Notes from our tech department:
This is the 1/24 scale Dumas 19' 1940 Barrel Back Model Boat Kit.
The Dumas Barrel Back kit (Static Displau only) allows the less
experienced modeler the opportunity to develop their planking skills,
building the confidence needed to proceed to a more advanced model. At
the same time this kit allows the advanced modeler to go beyond the basic
kit and add details to give it their own personal touch.


Laser cut wood parts
Numerous detailed parts included
Cast metal parts (Rudder, Propeller, Gas Cap, and more)


Detailed written instructions w/diagrams, parts locator sheet and
spare parts order form
Decal Sheet
Pedestals (made of wood)
Vacuum Formed Base (Plastic)


Length: 9" (241mm)
Beam: 3" (76mm)
Scale: 1:24


Hobby Knife with #11 blades: RMXR6909
Ruler: HCAR0460
Carpenters wood glue
Thick cyanoacrylate (CA) Glue: GPMR6015
Accelerator: GPMR6035
Sandpaper-Corse (60-80 GRIT), Medium (100-150 GRIT), Fine (220 GRIT)
" and " Paint Brush:
" Wide Masking Tape
Assorted drull bits: 1/32"(NO.67), 1/16", 1/8" and 1/4" Dia.


PER DUMAS: Please check your entire kit before beginning the
construction phase because missing parts will only be sent free

The boat can be painted any color scheme of modeler's choice. However
Dumas has supplied a list of paints that they use on the boat.

Flat Gray Primer- (TESR-2437)
Gloss Dark Red- (TESR-2404)
Gloss Clear- (TESR-2461)

Silver- (TESR-2146)
Brass- (TESR-2167)
Flat Tan- (TESR-2103)
Flat Lt. Gray (TESR-2163)
Red (TESR-2103)
Green (TESR-2171)

JCT 9/2/04

Manufacturer Mailing Address
Additional Manufacturer Contact Info