E-flite Opterra 1.2M BNF Basic w/AS3X and Safe

Tower Stock# LXHLJE  •  Manufacturer Stock# EFL11450
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 3 Payments ($66.67, $66.66, $66.66) Details
Money Saving Combos
Notes from our tech department:


Construction: EPO foam construction with carbon-fiber support and
molded-in LED channels for optional night flying capability (LED
lights not included), tool-free and fastener-free airframe
Wing: Two-piece, with multiple vortex generator locations to
enhance slow speed stability and control, enlarged elevons for
excellent control response, hands-free servo connection system
Nose Cones: Standard and FPV compatible camera noses with forward-
facing station above the nose where a GoPro Session, RunCam HD or
other similar camera can be mounted (camera not included)
Motor: 880Kv 480 size brushless outrunner
Electronic Speed Control: 30A brushless, 4S LiPo compatible, EC3
battery connector
Receiver: Spektrum DSMX serial receiver with AS3X (Artificial
Stabilization - 3aXis) that counters effects of wind and turbulence
by combining 3-axis sensing with specially tuned flight control
Servos: Two 13g micro
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.


E-flight Opterra 1.2m BNF (Bind-n-Fly) Basic
Spektrum DSMX/DSM2 4647 Serial Receiver plus A3235 Flight Control
with AS3X and SAFE Select Technologies
480 size Motor
Two Servos
Instruction Manual


Radio: 6-ch DSMX DSM2 Transmitter
LiPo Battery: 2200 - 3200mAh 3-4S
Battery Charger: Compatible with selected battery
LiPo charge bag and field equipment


Length: 20.7" (525mm)
Wing Area: 28.2 sq dm (437 sq in)
Wingspan: 47.2" (1200mm)
Flying Weight: 34.6oz (980g)
Control Throws Low Rate High Rate
Elevator, up/down: 0.20" (5mm) 0.31" (8mm)
Aileron, up/down: 0.63" (16mm) 0.94" (24mm)
Control: Elevon Mixing Required
Center of Gravity: Balance should be slightly nose down with pilot's
fingers between front and rear dimples on bottom of aircraft

jxs 6/28/18



Product Documents & Files

Manufacturer Contact Information