Losi 1/8 8IGHT 4WD Buggy Nitro RTR, Red/Yellow

Tower Stock# LXHCZG  •  Manufacturer Stock# LOS04010
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Shipping Restricted ItemDetails
Easy Pay
Request 3 Payments ($116.67, $116.66, $116.66) Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:


Chassis: 0.16 (4mm) thick 6061-T6 aluminum
Drive: Four wheel shaft drive
Transmission: Sealed metal gear
Differentials: Sealed viscous filled gear diff
Radio: 2-channel Spektrum DX2E DSMR
Throttle Servo: Spektrum SPMS605 9KG, 161 oz-in torque 6.0V
Steering Servo:
Radio Tray: Gen III with ball bearing linkages, and more accurate
linkage adjustment for longer servo life
Receiver Battery: Dynamite 1600mAh 6V NiMH, 3+2 hump configuration
with universal connector
Engine: Dynamite .21 cu in (3.4cc) glow engine with pull starter
Exhaust Pipe: Tuned pipe, black in color
Brake: Composite disc with steel pads
Suspension: Preset geometry to match settings used by professional
team drivers,
Steering: Fixed length arms
Shocks: 16mm Big Bore aluminum body oil-filled
Body: Molded polycarbonate with screened details, cab forward design
Tires: XBT tread, medium compound 4.4 (111mm) diameter,
Wheels: Dish 1.7 (42mm) wide, 3.3 (83.5mm) diameter
Ball Bearings: Full ball bearing drivetrain
Approximate Assembly Time: No assembly required
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the Product) will be free
from defects in materials and workmanship at the date of purchase.


Losi RTR 18 scale 8IGHT Glow Powered 4WD Buggy, 2-ch Radio,
6V NiMH Receiver Pack trimmed Body, Instruction Manual, .21 Engine
with Pull Starter, two waterproof Servos, 4-way Wrench


Glow Fuel: Car blend with 20-30 nitro content
Battery Charger: For NiMH receiver battery
Glow Igniter, Fuel Bottle and Track Equipment


Length: 19.6 (497mm)
Width: 12.1 (308mm)
Height: 7.1 (180mm)
Weight: 7.8lbs (3.5kg)
Ground Clearance: 2.4 (60mm)
Wheelbase: 12.7 - 12.9 (323 - 327mm)
Fuel Tank Capacity: 4.2oz (125cc)
Front Track: 12.0 (305mm)
Rear Track: 12.1 in (307mm) distance from outer edges of wheels
measured side-to-side
Final Drive Ratio: 11.5:1
Pinion Gear: 17T
Spur Gear: 50T
Gear Pitch: 1.0 module
Carburetor Settings
Low Speed Needle: Close by turning clockwise until it stops, then
turn counterclockwise two turns (42 hours) from the bottom (open)
High Speed Needle: Close by turning clockwise until it stops, then
turn counterclockwise (39 hours) from the bottom (open)
Idle Needle: Turn clockwise to increase idle, counterclockwise to
increase idle
When making adjustments turn needles only 112 turn at a time.
Refer to instruction manual for full break-in instructions.


For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 6x10x3mm Steering 2 DTXC1561
2 8X14X4mm flanged Fr Diff
2 8X14X4mm flanged Diff
2 12x34 Fr Wheels
2 8x16mm Fr Wheels 1 DTXC1585
2 12x18x4mm Rear Wheels 1 DTXC1597
2 8x16mm Fr Wheels 1 DTXC1585
2 5x11x4mm Fr Outdrive Couplers 1 DTXC1547
2 5x11x4mm Rear Outdrive Couplers 1 DTXC1547
Clutch bearing size not listed in manual

jxs 052118