Kinexsis 11.1V 800mAh 3S 30C LiPo, 18AWG, JST

Tower Stock# LXHBUG  •  Manufacturer Stock# KXSB0010
Shipping Note:Details
Product WarningDetails
Notes from our tech department:


Pre-wired with a JST connector and JST-XH balance connector
Capable of maximum continuous discharge rates up to 30C


Kinexsis 11.1V 800mAh 30C 2S LiPo Battery with JST Connector and
JXT-XH Balance Connector


LiPo Charging Bag
LiPo Compatible Battery Charger
Banana to JST Charge Adapter


Connector Type: JST
Discharge Lead Wire Gauge: 18AWG
Discharge Lead Length: 3.94" (100mm)
Balance Lead Length: 3.1 in (80mm)
Balance Connector: JST-XH
Voltage: 11.1V
Capacity: 800mAh
Cell Configuration: 3S1P
Dimensions, L, W, H: 2.83 x 1.02 x 0.75" (72 x 26 x 19mm)
Weight: 2.5oz (70g)
Maximum Continuous Discharge Current: 24A
Maximum Continuous Discharge Rate: 30C
Normal/Standard Charge Current: 800mA
Normal/Standard Charge Rate: 1C
Shape: Rectangular
Watt Hours: 8.88Wh


ALWAYS use a LiPo-approved Charger and Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children

jxs 05/07/18


Manufacturer Contact Information