Associated 1/8 RC8T3.1 Nitro Team Truck 4WD Kit

Tower Stock# LXHAPK  •  Manufacturer Stock# 80937
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 2 Payments ($305.00, $304.99) Details
Notes from our tech department:
This is the Radio Controlled, Glow Powered, 1/8 scale
Off-Road RC8T3.1 Competition Truggy Kit from Team Associated.

FEATURES

Chassis: 0.12" (3mm) thick 7075-T6 hard-anodized aluminum, with
keyed lower suspension plates
Drive: Four wheel shaft, 5.2" (133mm) CVA driveshafts for increased
traction and chassis support
Differentials: New V3 with H.T.C. (High Torque Capacity) internal
gears with increased fluid capacity and more consistent feel
straight-cut bevel gears for great acceleration and run time
Gearboxes: Updated design reduces differential movement for more
consistent gear mesh
Body: Clear untrimmed Pro-Line Predator
Shocks: 6061 aluminum bodied 16mm Big Bore with bleeder style caps
0.79" (20mm) inner diameter shock springs for optinal spring rates
Shock Towers: 7076-T6 aluminum, 0.197" (5mm) thick front tower,
0.157" (4mm) thick rear tower
Suspension: Race spec suspension arms, with arm pivots revised for
more ground clearance for better jumps and landings and greater
durability
Steering: Ball bearing equipped, +2mm steering block arms for smooth
and precise action
Engine Mount: Two-piece aluminum, sliding design for easy gear mesh
adjustment and engine removal
Brake: Bonded pads and machined steel rotors
Clutch: New 4 shoe design for precise power transfer and easy
maintenance, 13 tooth steel clutch bell
Spur Gear: 46 tooth
Fuel Tank: Molded plastic construction with splash guard
Ball Bearings: Full set, Factory Team rubber sealed
Caster: Adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Adjustable, camber refers to the angle of the
tops of the tires from vertical when when viewed from front or
behind vehicle

INCLUDES

RC8T3 Truggy Kit with Clear Body, Fuel Tank, Shocks, Decals
Shock Oil, Diff Oil, Air Filter and Instruction Manual

REQUIREMENTS

Radio: 2-channel with high torque steering servo
Engine: .21-.28 cu in rear exhaust
Exhaust System: Tuned pipe and header
Receiver Pack: 4.8 - 7.4V flat, LiPo, LiFe or NiMH
Wheels: 1/8 scale truggy
Tires: 1/8 scale truggy
Fuel: Model car blend, 30% nitro recommended
Polycarbonate safe spray or brush-on paint, body reamer
Glow starter, fuel bottle, starter box, tools and track equipment

SPECIFICATIONS

Vehicle;
Length: 22.05" (560mm)
Width: Varies
Weight: Varies
Wheelbase: 14.82" (376.5mm)
Body;
Length: 15.8" (401mm)
Width: 7.7" (195mm)
Height: 4.1" (104mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 8x16mm Fr Diff 1 DTXC1585
2 8x16mm Ctr Diff 1 DTXC1585
2 8x16mm R Diff 1 DTXC1585
4 6x10mm Steering 2 DTXC1561
4 5x8mm Steering 2 DTXC1523
2 6x12mm Fr Gearbox 1 DTXC1569
2 6x12mm Rear Gearbox 1 DTXC1569
4 8x16mm flanged Fr Uprights 2 ASCC1565
4 8x16mm flanged R Uprights 2 ASCC1565
2 5x10mm Clutch 1 DTXC1535

jxs 02/26/18
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info