RC4WD 1/18 Gelande II RTR w/BlackJack Body Set

Tower Stock# LXHAMD  •  Manufacturer Stock# Z-RTR0036
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the RC4WD 2.4GHz Radio Controlled, Electric Powered, Ready to Run
1/18 scale Gelande II Truck with BlackJack Body Set.


Chassis: Realistic machined billet aluminum ladder frame with scale
shock hoops, chassis servo mounts and hard body mounting points
Drive: Four wheel with Mini Hammer transfer case, steel driveshaft
and universals
Radio: 2.4GHz XR micro 2-channel with 2-in-1 micro ESC and receiver
Motor: FF-030 micro, brush equipped tuned for rock climbing and
scale driving
Axles: 1/24 cast Yota II axles with 8 round knuckles, removable diff
covers, new lower mounting points and compact offset front pumpkin
Transmission: R5 V2, plastic exterior and hardened brass and steel
Steering Servo: 9g analog metal gear micro servo
Battery: 2S 7.4V 850mAh 25C LiPo w/JST connector and no balance lead
Suspension: G2 double triangulated four link front and rear
Shocks: Ultimate Mini Scale Shocks 1.6" (40mm) machined from billet
aluminum and internally sprung
Body: BlackJack molded in hard plastic, deep green finish with
mirrors, door handles, grille, wiper and more
Interior: Fully detailed including seats, gear shifter, handbrake
and dashboard
Wheels: 1.0" (25.4mm) 6 lug stamped steel beadlock with chrome
finish, 7mm hex, 7mm wide, 7mm back space
Tires: Rock Crusher XT 1.0" miccro crawler
Bumpers: Molded plastic
Pinion Gear: 55P 10T
Warranty: RC4WD warrants this vehicle to be free from defects when
new. Limited warranty does not cover damages due to normal wear and
tear, user error in assembly or installation, user modifications,
user's failure to perform routine maintenance, and addit
aftermarket or optional parts.


Gelande II Truck with BlackJack Body, Radio, Servo, ESC/RX, 2S
LiPo Battery, Instructions


AA Batteries: Four for transmitter
LiPo Compatible Charger with JST connector
LiPo Charging Bag


Width: 4.26" (108.1mm)
Height: 4.42" (112.36mm)
Wheelbase: 5.15" (130.7mm)
Ground Clearance: 1.04" (26.43mm)
Final Drive Ratio: 112:1
Weight: 1.87lbs (0.85kg)

jxs 03/16/18

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info