Associated 1/10 Northrup Fabricators Trophy Rat BL RTR

Tower Stock# LXHAHK  •  Manufacturer Stock# 70019
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • packaging (see larger view)
Coupon discount not allowed by manufacturer for this product
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the 1/10 scale Brushless Electric Powered, 2.4GHz Radio Controlled,
Ready to Run Trophy Rat Truck from Team Associated.

**This version requires Battery and Charger.**


Chassis: Low center-of-gravity design, molded composite chassis
with hook and loop battery straps that accomodate NiMH and 2-3S
LiPo packs
Drive: Rear wheel with 81mm CVA driveshafts
Differential: Heavy duty sealed gear type with externally adjustable
V2 slipper clutch
Brushless Motor: Reedy 3300Kv
Radio: XP120 2.4GHz with DVC (Dynamic Vehicle Control) receiver w/
built-in adjustable gyro that allows vehicle stability to be
adjusted to flow with the terrain, enclosed water resistant
receiver box
Steering Servo: Reedy metal-gear high-torque digital
Electronic Speed Control: Reedy SC600-BL water-resistant with high-
current T-plug and LiPo low voltage cut off
Suspension: Fully adjustable geometry with vertical ball ends for
front and rear roll center adjustments
Shocks: V2 12mm big bore coil-over with blue anodized aluminum
Body: Factory finished, based on the Northrup Fabrication "Trophy
Rat" integrated LED lights, two front and two rear
Tires: High traction racing compound
Wheels: Method wheels with 12mm hex, matte black in color
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Ball Bearings: Fourteen rubber sealed


Ready to Run Trophy Rat Truck with Brushless Motor, 2.4GHz Radio w/
DVC Receiver, ESC, Trimmed Body w/Head and Tail Lights, and
Instruction Manual


AA Batteries: Four for transmitter
Battery: 7.4V LiPo with T-plug connector
Battery Charger: Compatible with selected battery
LiPo Charging Bag
Track Equipment


Length: 18.94" (481mm)
Width: 11.1" (282mm)
Height: 7.8" (198mm)
Weight: 4.04lbs (1834g)
Wheelbase: 12.68" (322mm)
Gearbox Ratio: 2.6:1
Battery Box Dimensions: 5.25 x 1.9" (133 x 48mm), battery space
can be lengthened by 2" (51mm) by removing rubber pad

Length: 18.9" (479mm)
Width: 7.5" (190mm) at rear of cab, widest point
Height: 5.9" (149mm)


For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
8 3x7x3mm Top Plate 4 DTXC1506
4 5x10x4mm Steering Rack 2 DTXC1535
4 5x10x4mm Transmission 2 DTXC1535
2 10x15x4mm Transmission 1 DTXC1595
4 5x10x4mm Rear Hub 2 DTXC1535
2 5x10x4mm Idler Gear 1 DTXC1535

jxs 01/25/18

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info