Associated 1/10 Northrup Fabricators Trophy Rat BL RTR

Tower Stock# LXHAHK  •  Manufacturer Stock# 70019
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments of $99.99 Details
Money Saving Combos
Notes from our tech department:
This is the 1/10 scale Brushless Electric Powered, 2.4GHz Radio Controlled,
Ready to Run Trophy Rat Truck from Team Associated.

**This version requires Battery and Charger.**


Chassis: Low center-of-gravity design, molded composite chassis
with hook and loop battery straps that accomodate NiMH and 2-3S
LiPo packs
Drive: Rear wheel with 81mm CVA driveshafts
Differential: Heavy duty sealed gear type with externally adjustable
V2 slipper clutch
Brushless Motor: Reedy 3300Kv
Radio: XP120 2.4GHz with DVC (Dynamic Vehicle Control) receiver w/
built-in adjustable gyro that allows vehicle stability to be
adjusted to flow with the terrain, enclosed water resistant
receiver box
Steering Servo: Reedy metal-gear high-torque digital
Electronic Speed Control: Reedy SC600-BL water-resistant with high-
current T-plug and LiPo low voltage cut off
Suspension: Fully adjustable geometry with vertical ball ends for
front and rear roll center adjustments
Shocks: V2 12mm big bore coil-over with blue anodized aluminum
Body: Factory finished, based on the Northrup Fabrication "Trophy
Rat" integrated LED lights, two front and two rear
Tires: High traction racing compound
Wheels: Method wheels with 12mm hex, matte black in color
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Ball Bearings: Fourteen rubber sealed


Ready to Run Trophy Rat Truck with Brushless Motor, 2.4GHz Radio w/
DVC Receiver, ESC, Trimmed Body w/Head and Tail Lights, and
Instruction Manual


AA Batteries: Four for transmitter
Battery: 7.4V LiPo with T-plug connector
Battery Charger: Compatible with selected battery
LiPo Charging Bag
Track Equipment


Length: 18.94" (481mm)
Width: 11.1" (282mm)
Height: 7.8" (198mm)
Weight: 4.04lbs (1834g)
Wheelbase: 12.68" (322mm)
Gearbox Ratio: 2.6:1
Battery Box Dimensions: 5.25 x 1.9" (133 x 48mm), battery space
can be lengthened by 2" (51mm) by removing rubber pad

Length: 18.9" (479mm)
Width: 7.5" (190mm) at rear of cab, widest point
Height: 5.9" (149mm)


For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
8 3x7x3mm Top Plate 4 DTXC1506
4 5x10x4mm Steering Rack 2 DTXC1535
4 5x10x4mm Transmission 2 DTXC1535
2 10x15x4mm Transmission 1 DTXC1595
4 5x10x4mm Rear Hub 2 DTXC1535
2 5x10x4mm Idler Gear 1 DTXC1535

jxs 01/25/18



Manufacturer Contact Information