Phoenix Model Focke-Wulf FW 190 .46-.55 GP/EP ARF

Tower Stock# LXGZRP  •  Manufacturer Stock# PH182
  • front/side (see larger view)
  • rear/side (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Money Saving Combos
Money Saving Combos
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**
This is the Electric or .46-.55 Glow Powered, Radio Controlled,
1:7 1/2 Almost Ready to Fly Phoenix Model Focke-Wulf FW 190 Scale Warbird II.
For Intermediate Flyers


Construction: Laser cut balsa and plywood
Wing: One-piece
dual servo aileron control
Landing Gear: Retractable with CNC suspension struts, 2.5" (65mm)
diameter main wheels, prebent wire tail gear
Cowl: Fiberglass, painted to match covering scheme
Canopy: Clear molded plastic with painted-on frame lines
Spinner: Scale type, black in color, 2.5" (65mm) diameter
Motor Mount: Plywood with 40mm standoffs
Engine Mount: Two-piece composite plastic
Fuel Tank: Approximately --oz (--cc)
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the


Preassembled Fuselage, Wing and Tail Assemblies, Landing Gear,
Wheels, Fuel Tank, Cowl, Linkages, Hardware and Instruction


Radio: 6-channel minimum
Servos: 5- (2-aileron, 1-elevator, 1-rudder, 1-retract,
1-throttle (if using glow engine)
For Electric Power:
Brushless Motor: Great Planes ElectriFly RimFire .32 recommended
Electronic Speed Control: Great Planes 45A ESC recommended if using
motor listed above
LiPo Battery: 4S 4500 - 5000mAh with connector to match selected ESC
Propeller: To match selected motor
For Glow Power;
Engine: .46 - .55 2-stroke OR .52 4-stroke
Propeller: To match selected engine
Glow starter and fuel

Building and field equipment


Wingspan: 55" (1400mm)
Length: 47.3" (1202mm)
Flying Weight: 6.17 - 6.39lbs (2800 - 2900g)
Wing Area: 526 sq in (34 sq dm)
Wing Loading: 26.87 oz/sq ft (82 g/sq dm)
Wing Type: NACA airfoils
Center of Gravity (CG): 4" (102mm) back from leading edge of wing
measured at fuselage
Control Throws; Low High
Elevator, up/down: 0.35" (9mm) 0.43" (11mm)
Aileron, up/down: 0.39" (10mm) 0.47" (12mm)
Rudder, left/right: 0.79" (20mm) 1.2" (30mm)


jxs 02/13/18

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info