Phoenix Model Stinson Reliant 30-35cc Gas/EP ARF 68.8"

Tower Stock# LXGZPZ  •  Manufacturer Stock# PH180
  • Thumbnail 1 (see larger view)
  • Thumbnail 4 (see larger view)
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Money Saving Combos
Money Saving Combos
 
LZ0443
Notes from our tech department:
This is the Radio Controlled, Electric or Gasoline Powered, 1:5 3/4 ARF
Stinson Reliant from Phoenix Model.
For Intermediate Level Flyers.

FEATURES

Construction: All wood, laser cut
Wing: Bolt-on two piece, dual servo aileron and flap control
Cowl: Fiberglass, painted to match covering scheme, black plastic
radial engine detail
Landing Gear: Main, fixed two-piece aluminum construction, 3.9"
(100mm) wheels, 1.8" (47mm) tail wheel
Wheel Pants: Fiberglass, height 10.6" (269mm), length 10.1" (257mm)
width 2.9" (74.5mm)
Fuel Tank: Approximately 16oz (480cc)
Spinner: Plastic construction 3.1" (80mm) diameter, black in color
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the
purchaser.

INCLUDES

Preassembled Fuselage, Wing and Tail Assemblies, Landing Gear,
Fuel Tank, Cowl, Wheel Pants, Linkages, Hardware and Instruction
Manual

REQUIREMENTS

Radio: 8-channel minimum
Servo: High torque, standard size. 2-aileron, 2-flap, 2-elevator,
1-rudder, 1-throttle if using gas engine
For Electric Power;
Brushless Motor: Electrifly RimFire 1.60 recommended
Electronic Speed Control: Castle Creations Talon 120HV 120A
recommended if using motor listed above
LiPo Batteries: Two 5S at least 4500mAh
Battery Charger: Compatible with selected batteries
Propeller: 20x10E if using motor listed above
Battery charger, LiPo charging bag
For Gasoline Power;
Engine: 30-35cc two stroke
Ignition Battery: 6.0V at least 2200mAh
Building and field equipment
Propeller: To match selected engine
Building and field equipment

SPECIFICATIONS

Length: 68.8" (1748mm)
Wingspan: 86.6" (2200mm)
Wing Area: 1322 sq in (85.4 sq dm)
Wing Loading: 30.14 oz sq/ft (92 g sq/dm)
Flying Weight: 17.4 - 17.8lbs (7900 - 8100g)
Wing Joiner Tube: Aluminum, 31.5" (800mm) long, 1.25" (32mm) diameter
Center of Gravity (CG): 5" (128mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low High
Aileron, up/down: 0.43" (11mm) 0.51" (13mm)
Elevator, up/down: 0.43" (11mm) 0.51" (13mm)
Rudder, right/left: 0.98" (25mm) 1.6" (40mm)
Flaps: Mid 0.79" (20mm) down Landing 1.02" (26mm) down

COMMENTS

If a replacement fuel tank is required, the 16oz DuBro (DUBQ0216),
tank can be used with the purchase of the Gasoline Conversion Kit
DUBQ0675.
Also, the 16oz Sullivan Slant Tank (SULQ1743) can be used with their
Gasoline Conversion Kit, SULQ2684.
Slight modification may be required when installing any aftermarket
fuel tank.

jxs 02/12/18
ir/jxs

Resources
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info