Phoenix Model Extra 260 30-35cc/EP ARF 78.7"

Tower Stock# LXGWVR  •  Manufacturer Stock# PH179
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Easy Pay
Request 3 Payments ($116.67, $116.66, $116.66) Details
Money Saving Combos
Notes from our tech department:
This is the Radio Controlled, Gasoline or Electric Powered Almost Ready to Fly
Extra 260 30-35cc 1:3 34 scale Aerobatic Airplane from Phoenix Model.
For Intermediate Flyers


Construction: Laser cut balsa and plywood
Wing: Bolt-on two-piece design, with side force generators on the
wing tips for extra lift in high-alpha maneuvers, aluminum wing
joiner tube
Covering: Hangar 9 UltraCote
Hatch: Removable for access to radio equipment
Cowl: Fiberglass with white, gray and red painted color scheme
to match covering
Canopy: Clear molded plastic
Landing Gear: Two-piece prebent aluminum with 3.3 (85mm) diameter
main wheels, 1 (25.4mm) tailwheel
Wheel Pants: Two-piece molded plastic, red in color
Spinner: 3.5 (89mm) diameter, plastic construction, red in color
Fuel Tank: Approximately 24oz (720cc)
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the


Prebuilt Wing, Tail and Fuselage sections, Landing Gear, Wheels,
Spinner, Decals, Hardware and Instruction Manual


Radio: At least 8-channel
Servos: Five high torque (2-aileron, 2-elevator, 1-rudder)
One standard servo for throttle if using gasoline engine
Receiver Battery: 6.0V at least 2200mAh
Building and field equipment
Electric Power
Brushless Motor: Electrifly RimFire 1.60 recommended
Electronic Speed Control: Castle Creations Talon 120HV 120A
recommended if using motor listed above
LiPo Batteries: Two 5S at least 4500mAh
Battery Charger: Compatible with selected batteries
Propeller: 20x10E if using motor listed above
Gasoline Power
Engine: 30-35cc two stroke
Ignition Battery: 6.0V at least 2200mAh
Building and field equipment
Propeller: To match selected engine


Wingspan: 78.7 (2000mm)
Length: 72.7 (1848mm)
Wing Area: 1236 sq in (79.7 sq dm)
Wing Loading: 23.27 ozsq in (71gsq dm)
Wing Type: NACA airfoils
Wing Tube Length: 29 (737mm)
Wing Tube Diameter: 1.27 (32.3mm)
Weight: 12.6 - 12.8lbs (5700 - 5800g)
Servo Mount: 0.83 x 1.6 (21 x 42mm)
Center of Gravity (CG): 6.3 - 6.5 (160 - 165mm) back from leading
edge of wing measured at the fuselage
Control Throws- Low High
Ailerons 0.47 (12mm) 10 expo 0.59 (15mm) 10 expo
Elevator 0.43 (11mm) 12 expo 0.59 (15mm) 12 expo
Rudder 1.4 (35mm) 15 expo 2.4 (60mm) 15 expo


Following are the colors of Hangar 9 UltraCote used, and order
number for 6 rolls:
White, HANQ1122
Light Gray, HANQ1139
Ferrari Red, HANQ1118
Yellow, HANQ1141
Black, HANQ1129

If a replacement fuel tank is required, the 24oz DuBro (DUBQ0224),
tank can be used with the purchase of the Gasoline Conversion Kit
Also, the 24oz Sullivan (SULQ1444) can be used with their Gasoline
Conversion Kit, SULQ2684.
Slight modification may be required when installing any aftermarket
fuel tank.

jxs 091417



Product Documents & Files

Manufacturer Contact Information