Kyosho 1/7 Scorpion XXL VE Black Type 2 BL Buggy RTR

Tower Stock# LXGVSC  •  Manufacturer Stock# 30973T2B
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Radio Controlled, Brushless Electric Powered, Ready to Run
1/7 Scale Scorpion XXL VE Type 2 Monster Buggy in Black from Kyosho.


Chassis: 0.12" (3mm) thick aluminum with molded perimeter frame
that anchors the roll bar
Drive: Rear wheel
Transmission: Metal gear single speed with adjustable double disc
slipper clutch
Motor and ESC: Team Orion VORTEX R8WP waterproof ESC, VORTEX 7
brushless motor, handles up to 4S (14.8V) LiPo battery
Radio: Kyosho 2.4GHz KT201 transmitter with LCD screen that displays
functions such as EPA & ABS brakes, KR200 receiver with fail-safe
setting, high-torque KS203 servo with aluminum case and metal gears
Suspension: Front "gull" type suspension arms for low shock mounting
position for greater stability, rear suspension typical of 1/10
scale race cars for high durability, 17mm hex aluminum rear hubs
allow the use of 1/8 scale racing truck wheels
Shocks: Composite body Big Bore with 4mm diameter shafts and
cartridge style shields
Shock Towers: Composite plastic
Wheels: Centerline style
Tires: Front ribbed, rear pin spike
Body: Painted & trimmed panels with 3D shaped air intakes on sides
that direct air over the motor and ESC, molded roll bar and roof,
wing mount allows use of rear wing from the Kyosho Inferno MP9
(rear wing not included)
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Battery Tray: Adjustable sliders, compatible with various 2-4S LiPo


Prebuilt Scorpion XXL VE Type 2 Monster Buggy, Painted Body, Radio
System, Brushless Motor, 14T Pinion Gear, ESC, Wrench and


Battery: 7.2-14.4V LiPo with T-plug connector
Battery Charger: Compatible with selected battery
Transmitter Batteries: Four AA
LiPo charging bag and track equipment


Length: 24.8" (630mm)
Width: 15.8" (402mm)
Height: 9.6" (244mm)
Wheelbase: 17.8" (452mm)
Front Tread: 13.9" (353mm)
Rear Tread: 13" (331mm)
Gear Ratio: 16.0:1
Weight with Body: 8.8lbs (4000g)
Front Tires: 5.1 x 1.7" (130 x 43mm)
Rear Tires: 5.5 x 2.8" (140 x 71mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 8x16x5mm Diff 1 DTXC1585
4 6x12x4mm Rear Gearbox 2 DTXC1569
4 8x16x5mm Front Uprights 2 DTXC1585
4 8x16x5mm Rear Uprights 2 DTXC1585
2 5x10x4mm Steering 1 DTXC1535
2 5x8x2.5mm Steering 1 DTXC1523
1 8x16x5mm Main Shaft 1 DTXC1585

jxs 07/28/17

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info