Associated 1/10 JRT SC10.3 Brushless RTR

Tower Stock# LXGUTP  •  Manufacturer Stock# 7082
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the 2.4GHz Radio Controlled, Brushless Electric Powered, 1/10 scale
Ready to Run SC10.3 Short Course Truck with the JRT Body.


Chassis: Molded composite plastic with low center of gravity design
Drive: Rear wheel
Differential: Heavy-duty sealed gear with externally adjustable V2
slipper clutch
Radio: XP120 2.4GHz 2-channel pistol grip with steering and throttle
trim and dual rate, metal-gear, high-torque Reedy digital steering
Motor: Reedy 3300Kv brushless motor
Electronic Speed Control: Water resistant Reedy brushless ESC with
T-plug battery connector and low voltage LiPo cutoff
Shocks: V2 coil-over, aluminum body with anodized blue finish
Wheels: Short course KMC replica, 12mm hex drive, width 1.6" (41mm),
Diameter: 3" (76mm)
Tires: High traction racing compound
Steering: Angled bellcrank "coplanar" design with integral servo
Body: Trimmed and factory finished with JRT Doug Mittag graphics
Suspension: Fully adjustable geometry with steel turnbuckles for
adjustable camber and front toe-in, vertical ball ends for front
and rear roll center adjustments
Caster: Adjustable front and rear, caster/toe-in refers to the angle
of the front when viewed from the side of the car in relation to
the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Ball Bearings: Fourteen rubber sealed
Bumpers: Front and rear composite plastic with AE logo rear mud flaps
Warranty: 90 day limited warranty through Team Associated beginning
at date of purchase


RTR SC10.3 Short Course Truck with the JRT Body, Radio System, ESC,
Brushless Motor, Decals and Instruction Manual


Battery: 6-cell sub-C, or 2-cell LiPo battery
Battery Charger: Compatible with selected battery
AA Cells: Four for transmitter
Track and maintenance equipment


Length: 21.65" (550mm)
Width: 11.54" (293mm)
Wheelbase: 12.87" (327mm)
Weight: 4.59lbs (2080g)
Gear Ratio: 2.6:1
Length: 21" (533mm)
Width: 8.8" (224mm) behind front wheels, narrowest point
11.1" (282mm) at rear wheels, widest point
Height: 5.9" (149mm)


Available with the following trim schemes;
Lucas Oil-Carl Renezeder, ASCD7081
Jhonlin Race Team (JRT), Doug Mittag, ASCD7082

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3/16x3/8" Steering Knuckles 2 DTXC1423
2 3/16x3/8" Idler Gear Shaft 1 DTXC1423
2 10x16mm Transmission 1 ASCC9832
4 3/16x3/8" Rear Hubs 2 DTXC1423
2 5/32x5/16" Diff gear 1 DTXC1411

jxs 07/03/17



Product Documents & Files

Manufacturer Contact Information