Dromida 1/18 Rally Car FPV RTR w/5.8GHz Goggles

Tower Stock# LXGTLF  •  Manufacturer Stock# DIDC0081
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the Electric Powered, Radio Controlled, 1/18 Scale
Ready to Run FPV Rally Car with Camera from Dromida.

*600TVL FPV Video Camera*
**25mW 40-Channel 5 Band 5.8GHz Video Transmitter**
**Tactic FPV-RM2 40-channel, 5.8GHz FPV**
monitor with 4.3" LCD and Micro Memory Card Port
**Tactic FPV-G1 Goggles**


Video Monitor: Tactic FPV-RM2 40-channel, 5.8GHz FPV monitor
(TACZ5152) with 4.3" (109mm) LCD and micro memory card port* and
sun shield, powered by 1S 3.7V 1400mAh LiPo battery (included)
*memory card port accepts up to 32GB memory card, not included
Video Transmitter: 25mW 40-channel, 5-band 5.8GHz
Camera: Factory Installed 600TVL FPV
Goggles: Tactic FPV-G1 Goggles (TACZ5200)
Chassis: Plastic construction with countersunk screw holes
Drive: Four wheel shaft
Differentials: Bevel gear type
Motor: Factory-installed Torque 370 motor with aluminum mount
Radio: Tactic D100 2-channel with RE-18 waterproof receiver and
speed control, and DS100 waterproof steering servo with servo saver
for precise steering control, steering and throttle trims and dual
rates, servo reversing LEDs for monitoring power levels
Rally Car Battery: 6-cell, 1300mAh NiMH
Battery Charger: USB for NiMH battery
Body: Printed and decaled molded polycarbonate
Shocks: Plastic body, oil-filled, new shorter design for better
Shock Towers: Composite plastic
Tires: High-grip rubber
Front Bumper: Foam
Ball Bearings: Full set included


RTR FPV Rally Car with Camera, Transmitter, Monitor, Goggles, LiPo
Battery for Monitor, NiMH Battery for Car, Motor, Radio System,
USB NiMH Charger, Sun Shield, Trimmed Body, Micro USB Charge Lead,
4 AA Batteries for Transmitter, Instruction Manual


Track and Maintenance Equipment


Length: 10.9" (277mm)
Width: 5.1" (130mm)
Height: 4.25" (108mm)
Weight w/Battery: 1.3lb (590g)
Wheelbase: 6.7" (170mm)


For increased speed Dromida offers a Brushless Conversion Kit
(DIDC1152) that includes a 5300Kv Brushless Motor, 25A ESC, and
other upgraded components. The Dromida 2S 7.4V 1600mAh battery
(DIDC1134) is recommended for best results and highest speed with
this conversion kit.
**Do not use a LiPo battery with the stock ESC. The stock ESC does
not have Low Voltage Cutoff, and will damage the LiPo battery.


For replacement or to upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
4 8x12mm Fr Uprights 2 DIDC1071
4 8x12mm Rear Uprights 2 DIDC1071
2 8x12mm Fr Diff 1 DIDC1071
2 8x12mm Rear Diff 1 DIDC1071
1 8x12mm Spur Gear 1 DIDC1071
1 6x10mm Spur Gear 1 DIDC1070
1 6x10mm Driveshaft 1 DIDC1070

jxs 07/14/17