Associated 1/8 RC8B3.1e Team 4WD Kit

Tower Stock# LXGPYM  •  Manufacturer Stock# 80936
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • packaging (see larger view)
Notes from our tech department:
This is the Team Associated Radio Controlled, Electric Powered, 1/8 scale
RC8B3.1e Team Buggy Kit.

New features that differ from the RC8Be include;
**H.T.C. (High Torque Capacity) Differentials**
**Revised Suspension Arm Pivots for More Ground Clearance**
**Anti-roll Linkage Curves Altered for More Chassis Support**
**New Shock Springs**
**Pro-Line Predator Body**


Chassis: Hard anodized 7075 aluminum
Drive: Four wheel, CVA shafts
Gearboxes: Bevel gear type with 3.38:1 ratio, and fast access
Shocks: 7075-T6 aluminum 16mm Big Bore with TiN coated 3.5mm shafts
larger diameter precision springs and optimized bladders for more
precise volume compensation
Shock Towers: 7075-T6 aluminum
Suspension: Front has pillow ball uprights for increased
adjustability and durability, refined suspension geometry with
lower hinge pin inserts for easy roll center adjustments
Motor Mount: Two-piece sliding design for easy motor removal and gear
mesh adjustment
Body: Pro-Line Predator buggy
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


RC8B3.1 Team Buggy Kit with Shocks, Body, Wing, Instruction Manual


Radio: 2-channel with high-torque steering servo
Motor & ESC: Brushless type for 1/8 scale buggies, Reedy Sonic
1512 series recommended
Battery: 4S LiPo
Battery Charger: To match selected battery
Wheels and Tires: 1/8 scale buggy
LiPo charging bag, glue, tools
Polycarbonate safe spray or brush-on paint


Length: 19.21" (488mm)
Width and weight vary with motor, ESC, wheels and tires used in the
finished kit
Wheelbase: 12.9" (327.5mm)
Tray Dimensions: 5.7 x 2 x 0.79" (145 x 51 x 20mm)
Length: 15.8" (401mm)
Width: 7.7" (195mm)
Height: 4.1" (104mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 8x16x5mm Fr Diff 1 DTXC1585
2 8x16x5mm Ctr. Diff 1 DTXC1585
2 8x16x5mm Rear Diff 1 DTXC1585
4 6x10x3mm Steering 2 DTXC1561
4 5x8x2.5mm Steering 2 DTXC1523
2 6x12x4mm Fr Gearbox 1 DTXC1569
2 6x12x4mm Fr Gearbox 1 DTXC1569
4 8x16x5mm Flanged Fr Uprights 1 ASCC1565
4 8x16x5mm Flanged R Uprights 1 ASCC1565

jxs 03/27/17

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info