Associated 1/10 RC10B64 Team 4WD Buggy Kit

Tower Stock# LXGPTJ  •  Manufacturer Stock# 90014
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 6 (see larger view)
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the 1/10 scale Electric Powered, Radio Controlled
Off-Road Competition RC10B64 Buggy Kit from Team Associated.


Chassis: Constructed of 0.098" (2.5mm) thick 7075 aluminum, narrow
configuration with plastic side guards
Drive: Four wheel shaft
Differentials: Three bevel gear type
Slipper Clutch: New adjustable center slipper clutch with Low
Coefficient Friction Pads (LCF)
Motor Mount: Factory Team aluminum, floating design allows
consistent torsional chassis flex
Steering Servo Mount: Aluminum/carbon fiber
Shocks: V2 12mm Big Bore oil-filled aluminum body with 3mm TiN
coated shafts and low friction X-rings for improved smoothness
Shock Towers: 0.16" (4mm) thick carbon fiber
Suspension: Adjustable axle height and roll centers, front and rear
anti-roll bars
Body: Team Associated clear body with JConcepts screw mounted wing
Ball Bearings: Full set Factory Team
Steering: Ball bearing equipped bellcrank type
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis, 7 aluminum caster blocks
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


RC10B64 Buggy Kit with clear Body, JConcepts Rear Wing, Decals,
Silicone Shock and Diff Oil, 5mm Front Aluminum Drive Hexes and
Instruction Manual


Radio: 2-channel with high-torque steering servo
Motor: 540 size brushless
Electronic Speed Control: To match selected motor
Battery: 2S, 7.4V shorty LiPo battery pack recommended
Battery Charger: To match selected battery
Tires and Wheels: 1/10 scale buggy
Pinion Gear: 48 pitch
Paint, building & track equipment


Wheelbase: 11.18" (284mm)
Internal Gear Ratio:
Length: 11.4" (290mm)
Width: 5.1" (130mm)
Height: 2.9" (74mm)


For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x8x2.5mm Steering Rack 2 DTXC1523
2 10x15x4mm Fr Gearbox 2 DTXC1595
2 10x15x4mm Rear Gearbox 2 DTXC1595
2 10x15x4mm Fr Outdrive 2 DTXC1595
2 10x15x4mm Rear Outdrive 2 DTXC1595
4 5x10x4mm Steering Blocks 2 DTXC1535
2 10x15x4mm Rear Hubs 1 DTXC1595
2 6x13x5mm Rear Hubs 1 DTXC1573

jxs 11/23/16



Product Documents & Files

Manufacturer Contact Information