Redcat Racing 1/10 Volcano S30 Truck Nitro RTR Red

Tower Stock# LXGLPJ  •  Manufacturer Stock# VOLCANOS30-REDP
  • front/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • packaging (see larger view)
Coupon discount not allowed by manufacturer for this product
Notes from our tech department:
This is the 1/10 scale Glow Powered, 2.4GHz Radio Controlled, Ready to Run
Volcano S30 Monster Truck with Red Body from Redcat Racing.


Chassis: 0.098" (2.5mm) thick aluminum alloy
Drive: Four wheel shaft
Differentials: Bevel gear type
Engine: .18 cu in (3.0cc) 2-stroke with pull starter
Exhaust: Aluminum natural finish tuned pipe
Fuel Tank: 2.5oz (75cc)
Suspension: Four link, aluminum tube style links
Shocks: Four aluminum capped, oil-filled
Radio: 2.4GHz RCR-2C with dual rate steering, throttle & steering
trim and reverse, 6kg steering servo, 3kg/6kg steering servo
Body: Trimmed and printed with Volcano S30 graphics
Tires: Off-road V-shaped tread without foam inserts
Wheels: Chrome plated plastic 3.5" (89mm) diameter, 2.04" (52mm)
wide, 12mm hex
Front and Rear Bumpers: Molded composite plastic
Brake: Composite disc
Caster: Adjustable front and rear, caster/toe-in refers to the
angle of the suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of
the tires from vertical when viewed from front or behind vehicle


Assembled Volcano S30 Monster Truck with 2.4GHz Radio, .18 cu Engine
Tuned Pipe, Painted Body and Instruction Manual


AA Batteries: Eight AA for transmitter
Fuel: 10-30% car blend, 20% recommended for break-in
Track and maintenance equipment


Length: 16.5" (420mm)
Width: 13" (330mm)
Height: 7.3" (185mm)
Wheelbase: 10.8" (275mm)
Ground Clearance: 1.2" (30mm) adjustable
Gear Ratio: 1:13.34
Length: 16.5" (419mm)
Width: 6" (152mm)
Height: 4.6" (116mm)


For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x10mm Front Hubs 1 DTXC1535
2 10x15mm Front Hubs 1 DTXC1595
2 5x10mm Rear Hubs 1 DTXC1535
2 10x15mm Rear Hubs 1 DTXC1595
2 10x15mm Front Gear Box 1 DTXC1595
2 10x15mm Rear Gear Box 1 DTXC1595
6 5x10mm Differential 3 DTXC1535

jxs 01/19/17

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info