Redcat Racing 1/10 Lightning STR Nitro Drift Car RTR Rd

Tower Stock# LXGLND  •  Manufacturer Stock# LIGHTNINGSTR-R
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Redcat Racing Glow Powered, 2.4GHz Radio Controlled, 1/10 scale
Ready to Run Lightning STR On-Road Drift Car with Red Body.


Chassis: 6061 aluminum construction 0.098" (2.5mm) thick, purple in
Drive: Four wheel shaft
Transmission: Two-speed
Radio: RCR-2C 2.4GHz pistol grip with dual rate steering, steering
and throttle trim
Servos: HX3CP steering and throttle servos
Engine: 0.16 cu in (2.67 cc) Vertex engine with rotary carb, foam
air filter, pull starter, fin cooled exhaust manifold
Exhaust: Two piece composite plastic tuned pipe
Fuel Tank: 2.5oz (75cc)
Shocks: Aluminum capped, oil-filled
Brake: Single composite disc
Front Bumper: Foam
Tires: On-road racing tires, 2.5" (65mm) diameter, 1.02 (26mm) wide
Wheels: 5-spoke chrome finish, 1.02 (26mm) wide, 2.5" (65mm)
diameter, 12mm hex
Body: Molded polycarbonate plastic construction, trimmed and painted,
separate rear wing
Caster: Adjustable front and rear, caster/toe-in refers to the
angle of the suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


RTR Lightning STR On-Road Car with painted Body, Radio System,
Engine, Tuned Pipe, Tires, Wheels and Instruction Manual


Fuel: Car blend with 10-30% nitro content, 20% required for break-in
AA Batteries: Twelve, 4 for transmitter, 8 for vehicle
Glow starter, fuel bottle, track and maintenance equipment


Length: 14.1" (360mm)
Width: 7.9" (200mm)
Height: 4.4" (112mm)
Wheelbase: 10.3" (262mm)
Ground Clearance: 0.18" (4.5mm)
Length: 16.1" (408mm)
Width: 7.5" (190mm)
Height: 3.9" (100mm)


For Replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
3 5x10mm Transmission 2 DTXC1535
2 10x15mm Fr Uprights 1 DTXC1595
2 5x10mm Fr Uprights 1 DTXC1535
2 10x15mm Rear Uprights 1 DTXC1595
2 5x10mm Rear Uprights 1 DTXC1535
Size of ball bearings in clutch not specified

jxs 03/20/17



Manufacturer Contact Information