Kyosho 1/9 DBX VE 2.0 4WD RTR

Tower Stock# LXGKJV  •  Manufacturer Stock# 34201T2B
  • front/side (see larger view)
  • rear/side (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Radio Controlled, Brushless Electric Powered, 1/9 scale
Ready to Run Kyosho DBX VE2.0 Readyset Buggy.


Chassis: Aluminum 0.098" (2.5mm) thick
Drive: Four wheel shaft drive, large center shaft and swing shafts on
each wheel
Differentials: Front, center and rear bevel gear type
Radio: 2.4GHz Kyosho Synchro KT-231P with throttle EPA, dual rate
steering and 3-channel receiver
Steering Servo: KS4031-06W high torque metal gear waterproof
Motor: Team ORION VORTEX R10 EVO brushless, with aluminum die cast
Electronic Speed Control: Team ORION VORTEX R10 with cooling fan and
5 item program for precise adjustments of brake, timing advance,
cutoff voltage, heat protection and more, T-connector for battery
Shocks: Large capacity oil-filled
Shock Towers: Composite plastic
Ball Bearings: Full set included
Body: Printed and trimmed forward cabin design
Main Gear: 46T
Pinion Gear: 16T
Wheels: Molded plastic high rigidity dish type, yellow in color
Tires: Micro square pattern rubber, vehicle is compatible with a
large range of 1/8 scale tires and wheels
Battery Box: One-piece plastic, compatible with lithium batteries
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Kyosho DBX VE2.0 with Radio, Motor, ESC, Body, Rear Wing and
Instruction Manual


Battery: 7.2V NiMH recommended with T-connector
Battery Charger: Compatible with selected battery
AA Battery: Four for transmitter
Large and small phillips screwdriver, track and maintenance eqiup.


Length: 18.7" (475mm)
Width: 11.8" (300mm)
Height: 6.1" (154mm)
Wheelbase: 12.6" (320mm)
Front and Rear Tread: 9.7" (246mm) distance between center of tires
measured side-to-side
Tires: Diameter 4.5" (115mm), Width 1.8" (45mm)
Gear Ratio: 8.87:1
First Reduction: 2,88 (46T/16T)
Second Reduction: 3.08 (450T/13T)
Weight: 5.2lbs (2,370g)
Length: 12.2" (311mm)
Width: 7.2" (182mm)
Height: 4.2" (107mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 12x18x4mm Front Diff 2 DTXC1597
4 12x18x4mm Rear Diff 2 DTXC1597
1 5x8x2.5mm Front Gearbox 1 DTXC1523
1 5x8x2.5mm Rear Gearbox 1 DTXC1523
1 5x10x4mm Front Gearbox 1 DTXC1535
1 12x18x4mm Center Gearbox 1 DTXC1597
1 5x10x4mm Rear Gearbox 1 DTXC1535
2 12x18x4mm Steering Knuckles 1 DTXC1597
2 6x12x4mm Steering Knuckles 1 DTXC1569
2 12x18x4mm Rear Knuckles 1 DTXC1597
2 6x12x4mm Rear Knuckles 1 DTXC1569

jxs 10/13/16

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info