Hitec D946TW FMC Multi-Purpose Titanium Gear 25T Servo

Tower Stock# LXGDKN  •  Manufacturer Stock# 36946
Hitec D946TW FMC Multi-Purpose Titanium Gear 25T Servo (large view)
Notes from our tech department:

FEATURES

Smart Sense Technology for servo analytics
Durable titanium alloy metal gears with dual ball bearings
Ultra hard gear shaft with three axial metal bushings
32-bit MCU and 12-bit ADC for unprecedented programmability and
flexibility
*Programmable digital amplifier with MOSFET drive, programmable
functions include End Point Adjustments, Direction, Fail Safe,
Dead Band, Speed (slower), Soft Start Rate, Overload Protection
Data Save/Load, Program Reset
Water and dust resistant (splash proof)
Metal case

INCLUDES

Hitec D-Series Dynamo D-946TW 32 Bit Aluminum Case Titanium Gear
Servo
0.98" (25mm) Single Arm
1.7" (44mm) Double Arm
1.5" (38mm) 4-Point Horn
1.4" (36mm) Round Horn
Four each Grommets, Eylets and Mounting Screws
Metal Adapter Ring

SPECIFICATIONS

4.8V 6.0V 7.4V
Speed: 0.16 0.12 0.10 sec/60░
Torque: 194 250 319 oz-in
14 18 23 kg-cm
Motor Type: Coreless Metal Brush
Current Draw at Idle: 30mA
No Load Operating Current Draw: 470mA
Stall Current Draw: 6,200mA
Dimensions: 1.57 x 0.79 x 1.50" (40 x 20 x 38mm)
Weight: 2.40 oz (68.0g)
Number of Teeth on Output Spline: 25
Diameter of Horn Screw: 3mm
Dead Band Width: 1 Ás
Connector Gauge (AWG)/Strand Count: 20/80

COMMENTS

*Programmable features require Hitec Servo Programmer sold separately
HFP-30, DPC-11, HRCP4429

A note on Coreless motors: conventional servo motors have a steel
core armature wrapped with wire that spins inside the magnets. In
a Coreless design, the armature uses a thin wire mesh that forms a
cup that spins around the outside of the magnet eliminating the
heavy steel core. This design results in smoother operation and
faster response time.

jxs 05/10/18
ir/jxs

Resources

Manufacturer Contact Information