This is a Hop-Up Light Kit for the Tamiya Semi-Trailer (TAMC0632) that is|
used with the Tamiya King Hauler (TAMC0631).
These lights are for brake lights (one left and one right) and
turn signal (or blinker) lights (one left and one right). The
bulbs are clear and installed behind the brake and turn signal
lenses (just like a real cartruck).
One Light Set: Brake and blinker lights, light cable (that runs the
length of the trailer) and plug (to plug into connector cable).
One Connector Cable: Connects the light set to the circuitry board on
the tractor (the circuitry board is included in the tractor
One Rubber Bushing: To protect the light cable where it passes
throught the front of the trailer.
One Plastic Bushing: To protect the light wires where they pass
through the floor of the trailer to the rear bumper.
Two Nuts(2mm), two Bolts(2x15mm) and Two Washers(2mm): For mounting
the plug receptacle in the tractor body.
One Double-Sided Tape
One Illustrated instructions
This light set is powered by the 6-cell motor battery in the tractor.
Must use the Tractor Lights also to make functional.