Multiplex ParkMaster PRO 3D EP Kit Plus 38.4"

Tower Stock# LXFUHZ  •  Manufacturer Stock# M264275
Multiplex ParkMaster PRO 3D EP Kit Plus 38.4
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the radio controlled, electric powered,
Multiplex ParkMaster Pro Park Flyer Airplane Kit with Power Set.
For Intermediate Modelers.
Fully 3D capable, can be flown outdoors in moderate wind.


Construction: Elapor foam white in color
Wings: One-piece all foam
Motor: Himax C 1220 brushless
Electronic Speed Control: BL-30S S-
Servos: Four Nano-Karbonite
Radio Compartment: Accessible under wing
Aileron Control: Dual servo
Landing Gear: Main, prebent fixed wire 0.008" (2mm) diameter,
Wheels: Two foam 2" (51mm)
Motor Mount: CFRP reinforced for maximum durability
Canopy: Elapor foam
Decals: Precut peel and stick application with green, red and black
Building Time: Ready to fly in several hours


Pre-molded wings, fuselage and tail assemblies, pushrods, all
hardware, pre-bent 0.008" (2mm) wire landing gear, two 2" (51mm)
main wheels, plastic motor mount, decal sheet, photo-illustrated
instructions, motor, ESC and propeller


Battery: 3S 11.1V 950mAh LiPo
Battery Charger: LiPo compatible
Transmitter and Receiver: 4-6 channel
Misc. Items: Building and field equipment


Wingspan: 38.4" (975mm)
Wing Area: 450 sq in (29 sq dm)
Weight: 18.4oz (522g)
Wing Loading: 5.9 oz/sq ft) (18 g/sq dm)
Length: 40.5" (1029mm)
Airfoil: Fully symmetrical, mid-wing placement
Center of Gravity: 4.3 - 4.7" (110 - 120mm) Back from the wing's
leading edge at the fuselage
Control Throws-
Ailerons: 2.5" (65mm)
Elevator: 2.5" (65mm)
Rudder: 3.5" (90mm)


This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the

jxs 12/10/15

Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info