Phoenix Model Super Cub PA-18 30cc Gas/EP ARF 107"

Tower Stock# LXFNVK  •  Manufacturer Stock# PH114
  • Thumbnail 1 (see larger view)
  • Thumbnail 5 (see larger view)
Easy Pay
Request 3 Payments ($166.67, $166.66, $166.66) Details
Notes from our tech department:
This is the Radio Controlled, Electric, or Gasoline Powered, 1/4 scale
Almost Ready to Fly Phoenix Model Super Cub 30cc Airplane.
For Intermediate Modeler/Fliers.

FEATURES

Construction: Laser cut balsa and light plywood
Wing: 2 piece w/all wood construction, ailerons pre-installed,
aluminum wing joiner
Aileron and Flap Control: Dual servo
Covering: Hangar 9 UltraCote
Radio Compartment: Plywood reinforced
Cowl Pre-painted Fiberglass
Canopy: Clear with painted-on frame lines
Landing Gear: Scale shock absorbing steel main gear,aluminum tail
gear
Wheels: Two 4.25" (108mm) foam main, one 1" (25mm) tail wheel
Fuel Tank: Approximately 16oz (473cc)
Motor Mount: Three plywood plates with aluminum standoffs
Engine Mount: Plywood with aluminum standoffs
Warranty Period: 90 day limited warranty

INCLUDES

ARF Super Cub 30cc Airplane with Landing Gear, Wheels, Fuel Tank,
Instrument Panel, Decals, Pilot, Instruction Manual

REQUIREMENTS

For Gasoline Operation;
Engine: 30cc 2/stroke

For Electric Operation;
Brushless Motor: Rimfire 1.60
ESC: 120-160A
LiPo Battery: 12S up to 5000 - 6000mAh (not carried)
LiPo Charger: To match selected battery
Propeller: 18x8 E APC

Radio: 6-channel
Servos: Eight standard high-torque (2-aileron; 2-flap; 2-elevator;
1-rudder; 1 throttle)
Y-Harness: For ailerons
Receiver Battery: 6V NiMH, at least 2400mAh
Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
propeller, building and field equipment.

SPECIFICATIONS

Wingspan: 107" (2720mm)
Weight: 19 - 20lb (9 - 9.5kg)
Length: 68.6" (174.2m)
Wing Area: 1705 sq in (110 sq dm)
Wing Loading: 26.54 oz sq/in (81 sq/dm)
Wing Type: NACA Airfoil
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: 4.3" (109mm) Back from the wing's leading edge
measured at the fuselage
Control Throws- High Rate Low Rate
Elevator: 0.39" (10mm) 12% expo 0.47" (12mm) 12% expo
Rudder: 1.2" (30mm) 15% expo 1.6" (40mm) 15% expo
Ailerons: 0.39" (10mm) 10% expo 0.47" (12mm) 10% expo
Control Throw Flap: mid, (15mm) down, landing 20mm down

COMMENTS

If a replacement fuel tank is needed the DuBro 16oz Fuel Tank
DUBQ0216 can be used. Some trimming and modification may be
required when installing any aftermarket fuel tank.

Following are the colors of Hangar 9 UltraCote used, and order
number for 6' rolls:
White, HANQ1122
True Red, HANQ1118

jxs 10/06/15
ir/jxs

Resources

References

Product Documents & Files

Manufacturer Contact Information