Phoenix Model SBD Dauntless .46-.55 GP/EP ARF 56.7"

Tower Stock# LXEXDY  •  Manufacturer Stock# PH123
  • front/side (see larger view)
  • packaging (see larger view)
Money Saving Combos
Money Saving Combos
 
LZ1605
 
LZ1606
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Glow or Electric Powered,
Almost Ready to Fly SBD Dauntless Scale Warbird Airplane from Phoenix Model.
For intermediate pilots.

FEATURES

Construction: Balsa and ply
Wings: Two-piece with NACA airfoil, aluminum wing joiner,
dual servo controlled flaps to slow landing speed
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Cowl: Fiberglass, painted to match color scheme
Landing Gear: Mechanical retracts, prebent wire tail gear with
3" (76mm) diameter wheels
Fuel Tank: 12oz (355cc) approximate
Engine Mount: Two-piece composite
Motor Mount: Plywood

INCLUDES

ARF SBD Dauntless with Retractable Landing Gear, Wheels, Wheel Pants
Cowl, Painted Pilot and Instruction Manual

REQUIREMENTS

Radio: 6-channel minimum
Servo: 7 standard,: 2-aileron; 2-flap, 1-elevator; 1-rudder;
1-throttle (if using glow engine)
Retract Servo: 180 Futaba S3170G Digital Planetary Gear Retract
Servo recommended
Receiver Battery: 4.8-6V / 800-1200mAh NiMH
For electric power;
Brushless Motor: Rimfire .46 - .55
ESC: 50-80A, to match selected motor
LiPo Battery: 4-6S, at least 4000mAh
Battery Charger: Compatible with selected battery
LiPo charging bag, propeller, field equipment
Glow Power;
Engine: .46-.55 cu in 2-stroke, OR .52 cu in 4-stroke
Propeller: For selected engine
Glow fuel, glow starter, field equipment

SPECIFICATIONS

Wingspan: 56.7" (1440mm)
Length: 44.9" (1140mm)
Flying Weight: 106 - 116oz (3,000 - 3300g)
Wing Area: 651 sq in (42 sq dm)
Wing Type: NACA
Center of Gravity: 4.5" (115mm) back from the leading
edge of the wing measured at the fuselage
Control Throws- Low High
Ailerons: 0.31" (8mm) 10% Expo 0.39" (10mm) 10% Expo
Elevator: 0.31" (8mm) 12% Expo 0.39" (10mm) 12% Expo
Rudder: 0.79 (20mm) 15% Expo 1.2" (30mm) 15% Expo
Flap: 0.59-0.79" (15-20mm) down

COMMENTS

If a replacement fuel tank is needed, the DuBro 12oz (DUBQ0212), or
the Sullivan Square 12oz may be used. Some trimming and
modifications may be required.

jxs 03/19/15
ir/jxs

Resources
See Tower Catalog page 32.
Know Before You Fly
Easy RC: Airplanes
Industry Review #1
Manufacturer Mailing Address
Additional Manufacturer Contact Info