Dromida LiPo 2S 7.4V 1600mAh 20C BX/MT/SC4.18

Tower Stock# LXDWWF  •  Manufacturer Stock# DIDC1134
Dromida LiPo 2S 7.4V 1600mAh 20C BX/MT/SC4.18 (large view)
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the optional 7.4V 1600mAh 20C LiPo Battery
for the Dromida MT, BX and SC Vehicles.


For use when converting Dromida vehicles to brushless power, see


7.4V 1600mAh 20C LiPo Battery
Instruction Sheet


LiPo compatible charger
LiPo charging bag


Capacity: 1600mAh
Number of Cells in Series: 2
Rated Voltage: 7.4V
Continuous Discharge Rate: 20C
Maximum Recommended Charge Current: 1C (1.6 amps)
Charge Lead: 0.75" (19mm) long wire w/XH Balance Plug
Discharge Lead: 20AWG, 3.5" (90mm) long wire w/Mini Plug
Pack Dimensions: 3.3 x 1.2 x 0.7" (85 x 31 x 17mm)
Weight: 3oz (85g) all plugs and wires are included in weights


**Do not use to power Dromida vehicles with stock brushed power
systems. The stock ESC is not compatible with LiPo batteries.**

ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts

jxs 03/19/14

Parts Compatibility
Manufacturer Mailing Address
Additional Manufacturer Contact Info